Owner manual

21
Configuring the KDS Legato 200 Series
KDS Legato 200 Series Users Manual
KD Scientific Legato 200 Series Syringe Pump Users Manual
Publication 5617-002-Rev F
S
etting the Time and Date
The date and time is displayed on each screen. A built in
battery backup will maintain the date and time even if the
p
ump loses power or is unplugged for a period of time.
In the Set-up screen, press
Date/Time
Date/Time Display
Press mm/dd/yy to change the date format
(month/day/year)
(day/month/year)
(year/month/day)
Enter the date.
Press AM/PM to change the time format.
AM
PM
24 Hour
Enter the current time in hh:mm:ss
(hours:minutes:seconds).
Accept the changes made by pressing
and go back to the Set-up screen.
Cancel the changes made by pressing
and go back to the Set-up screen.
NOTE: Remember to activate the battery
by removing the plastic tab on the
bottom of the pump.
NOTE: Remember to use the :
NOTE: The year must be entered as YY,
i.e. 2009 is entered as 09
NOTE: Remember to use the /
NOTE: The date AND time
m
ust be entered.
P
ress
Press to change the
date format
Press to change the
time format
phone 508.429.6809 fax 508.893.0160
e-mail info@kdscientific.com web www.kdscientific.com