Owner manual

31
Operating the KDS Legato 200 Series
KDS Legato 200 Series User’s Manual
KD Scientific Legato 200 Series Syringe Pump User’s Manual
Publication 5617-002-Rev F
Select Program
Review Program Steps
(Pump Operation Profiles)
S
elect Syringe Manufacturer & Size
OR
Create New Syringe Type
Enter Pump Operation Profile
Parameters
Validate Commands and
I/O Operations
C
ustom Program Workflow
The following flow diagram describes the use of an
Custom Program:
The software provides the user with a variety of prompts
and warnings to help guide the setup of programs. For
example, if a pump Program incorporates steps that
exceed the capacity of the defined syringe, the system will
prompt you that parameters are out-of-range. The system
also prompts users if required values are not entered.
✐
NOTE: The pump will check the validity of
parameters entered for each Step in the
Program, but will not review the Program in
its entirety to verify that it is logical and can
be fully executed
phone [phone] fax [phone]
e-mail [e-mail] web www.kdscientific.com