Owner manual

36
Operating the KDS Legato 200 Series
KDS Legato 200 Series User’s Manual
KD Scientific Legato 200 Series Syringe Pump User’s Manual
Publication 5617-002-Rev F
C
reating a Custom New Program
If none of the Programs stored on the KDS Legato 200
Series match your requirements, you can create a new
P
rogram and store the Program for use. The following
flow diagram outlines the basic steps you will follow to
create a new Program:
New User-Defined Program creation workflow
TO CREATE A NEW USER-DEFINED PROGRAM
1. From the Program Configuration or Programs
screen, choose the Program Select button to enter
the Program Selection screen.
2. Select New Program then choose Accept or press
New Program again.
3. On the Program Name screen, type the name of
your Program using the onscreen keyboard.
Choose the Symbols/Numbers button to
display the list of available numbers and symbols
that can be included in the Program Name. To
switch the keyboard back to letters mode, choose
the Letters button (ABC).
New Program Name Entry screen showing letter keys.
To view numbers/symbols, choose the use button
in the lower left corner
phone [phone] fax [phone]
e-mail [e-mail] web www.kdscientific.com