Owner manual

KD Scientific Legato 200 Series Syringe Pump User’s Manual
Publication 5617-002-Rev F
70
Appendices
KDS Legato 200 Series User’s Manual
Pusher Block Assembly
1. Remove Dual Syringe Anti-Syphon Bracket by
unscrewing and removing the two T Knobs and
two Spring Washers.
2. Attach the Pusher Bar to the Pusher Block using two
flat head screws.
3. Attach the Anti-Syphon bar to the Pusher Bar with
three Thumbscrews and three Springs. Slide
Thumbscrews thru the Pusher Bar’s holes, slide the
Springs over the Thumbscrews and tighten
Thumbscrews to the Pusher Bar.
phone [phone] fax [phone]
e-mail [e-mail] web www.kdscientific.com
APPENDIX C: RACK ACCESSORIES/OPTIONS
Mounting a 4 X 140 Multi-Rack (Continued on page 69)