Owner manual

KD Scientific Legato 200 Series Syringe Pump User’s Manual
Publication 5617-002-Rev F
71
Appendices
KDS Legato 200 Series User’s Manual
Syringe Holder Assembly
1. Remove four set screws from the Dual Syringe Holder
using the provided Hex Key.
2. Attach the Multi-Holder onto the Dual Syringe
Holder using four #10-32 x
1
⁄2" screws using a
phillips head screwdriver.
3. Attach Clamp Bar by screwing the Multi-Syringe
Clamp Knob into the threaded bar attached to the
Multi-Holder.
M
ounting a 4 X 140 Multi-Rack (Continued)
phone [phone] fax [phone]
e-mail [e-mail] web www.kdscientific.com