Owner manual

KD Scientific Legato 200 Series Syringe Pump User’s Manual
Publication 5617-002-Rev F
73
Appendices
KDS Legato 200 Series User’s Manual
M
ounting a 6/10 Multi-Rack (Continued)
Syringe Holder Assembly
1. Remove Syringe Clamp bracket from the Syringe
Holder by unscrewing knob.
2. Remove four set screws from the Dual Syringe
holder using the provided Hex Key.
3. Place the Multi-Holder on the Dual Syringe Holder
and attach using four #10-32 x
1
⁄2" Screws using
phillips head screw driver.
4. Screw the two Post Clamp Guides into
Multi Syringe Holder
4. Attach Clamp Bar by screwing the Multi-Syringe
Clamp Knob into the threaded bar attached to the
Multi-Holder.
phone [phone] fax [phone]
e-mail [e-mail] web www.kdscientific.com