Owner manual

80
Appendices
KDS Legato 200 Series User’s Manual
KD Scientific Legato 200 Series Syringe Pump User’s Manual
Publication 5617-002-Rev F
!
1
0V
A
nalog Input Option
Turning the Potentiometer CW will increase the motor speed (center pin is 10 VDC) and turning the Potentiometer
CCW will decrease the motor speed (center pin is 0 VDC).
✐
NOTE: Refer to the accessories section for
recommended mate connector and cable.
phone [phone] fax [phone]
e-mail [e-mail] web www.kdscientific.com
✐
NOTE: Although the Analog Mode cycle
time is 100 ms, when changing from min to
max (or max to min) rates please allow a
minimum of 250 ms.
✐
NOTE: Voltage must be set to 0 VDC when
pump is turned on.