Owner manual

85
Appendices
KDS Legato 200 Series Users Manual
KD Scientific Legato 200 Series Syringe Pump Users Manual
Publication 5617-002-Rev F
APPENDIX E: MAINTENANCE
Maintenance
KDS Legato 200 Series pumps require no special
maintenance other than keeping them clean by avoiding
a
ccidental spills of pumped material. Refer to the
chemical compatibility chart below for specific chemical
resistance information.
The two guide rods and the lead screw should be sparingly
l
ubricated periodically; every 100 hrs the pump will remind
you. The guide rods and the lead screw should be lubricated
with Super Lube Synthetic Grease provided with the pump.
To clean the exterior surfaces, use a lint-free cloth to
remove loose dust. Use care to avoid scratching the clear
d
isplay window. For more efficient cleaning, use a soft
cloth dampened [not soaked] with water, an aqueous
solution of 75% isopropyl alcohol, or a mild detergent.
A Satisfatory
B Fair, Minor Effects
C Poor, Moderate Effects
D Severe Effects
- not tested
The chemical resistance data provided is for reference only. The data is based on the
manufacturer’s recommendations and is not a guarantee of chemical compatibility for
your test conditions. Wipe any spills immediately.
phone 508.429.6809 fax 508.893.0160
e-mail info@kdscientific.com web www.kdscientific.com
Chemical Compatibility Chart
Chemical Concentration
Overlay
Cover
Overlay
Adhesive
Acetonitrile 99.5% A A
Methyl alcohol 99.8% A -
Hydrochloric Acid 36.5% A A
Bleach 100% A A
Windex
®
100% A A
Isopropyl Alcohol 99.5% A D
Dish Soap - A A
Motor Oil 100% A A
Simple Green 100% A A
Gasoline 100% A D
Ethylene Glycol (Antifreeze) 100% A A
Mineral Oil 100% A A
Ammonia 27.0% A A
Magnalube 100% A A
Superlube 100% A A
Acetone 99.5% A D
Soda (Coca-Cola)
®
100% A A
Sulfuric Acid 95.0% D D
Dimethyl Sulfoxide 99.9% A C
Sodium Hydroxide 50% A A
Nitric Acid 68.0% D D
Chloroform 100% D D