User guide

16
Operating the KDS Legato 950 Series
KDS Legato 950 OEM Series User’s Manual
phone [phone] fax [phone]
e-mail [e-mail] web www.kdscientific.com
KD Scientific Legato 950 OEM Series Syringe Pump User’s Manual
Publication 5617-012 Rev A
IRATE
Sets or displays the infusion rate. Configuration Run
screen mode only. The rate argument may be replaced
by “max” or “min” to set the maximum or minimum rate,
respectively. “lim” may be used to display the range
limits.
Command format:
irate [max|min|lim|{rate} {rate units}]
Query response:
<lf>[##:]# xl/xxx<cr>
<lf>[##]<prompt>
or:
<lf>[##:]# xl/xxx to # xl/xxx<cr>
<lf>[##]<prompt>
WRAMP
Sets or displays the withdraw rates while ramping.
Configuration Run screen mode only.
Command format:
wramp [{start rate} {end rate} {rate units}
{ramp time in seconds}]
Query response:
<lf>[##:]Ramp not set up.<cr>
<lf>[##]<prompt>
or:
<lf>[##:]# xl/xxx to xl/xxx in # seconds<cr>
<lf>[##]<prompt>
WRATE
Sets or displays the withdraw rate. Configuration Run
screen mode only. The rate argument may be replaced
by “max” or “min” to set the maximum or minimum rate,
respectively. “lim” may be used to display the range
limits.
Command format:
wrate [max|min|lim|{rate} {rate units}]
Query response:
<lf>[##:]# xl/xxx<cr>
<lf>[##]<prompt>
or:
<lf>[##:]# xl/xxx to # xl/xxx<cr>
<lf>[##]<prompt>
V
olume commands
CIVOLUME
Clears the infused volume. Configuration Run screen
m
ode only.
Command format:
civolume
CTVOLUME
Clears the target volume. Configuration Run screen
m
ode only.
Command format:
ctvolume
CVOLUME
Clears both the infused and withdrawn volumes.
Configuration Run screen mode only.
Command format:
cvolume
CWVOLUME
Clears the withdrawn volume. Configuration Run
screen mode only.
Command format:
cwvolume
IVOLUME
Displays the infused volume. Configuration Run screen
mode only.
Command format:
ivolume
Query response:
<lf>[##:]# xl<cr>
<lf>[##]<prompt>
SVOLUME
Sets or displays syringe volume. Configuration Run
screen mode only.
Command format:
svolume
Query response:
<lf>[##:]#.####ul<cr>
<lf>[##]<prompt>
or:
<lf>[##:]#.#### ml<cr>
<lf>[##]<prompt>
✐
NOTE: To clear a ramp, use CTTIME
command.