Kemro K2 Kemro UserID classic / eco User Identification System User's Manual V 1.
© KEBA 2008 Specifications are subject to change due to further technical developments. Details presented may be subject to correction. All rights reserved. Document: version 1.01 / article no.: 1000731 Filename: kemro_userid_bden.doc, last saving on: 29. 4. 2008 A: KEBA AG, Gewerbepark Urfahr, A-4041 Linz Tel.: +43 732 7090-0, Fax: +43 732 7309-10, E-Mail: keba@keba.com D: KEBA GmbH Automation, Leonhard-Weiss-Strasse 40, D-73037 Göppingen, Tel.: +49 7161 9741-0, Fax: +49 7161 9741-40, E-Mail: keba@keba.
User Identification System History History Version V1.00 V1.01 Date 100408 290408 User's Manual, Version: 1.
History 4 Kemro UserID classic / eco User's Manual, Version: 1.
User Identification System Contents Contents 1 Introduction......................................................................................................................9 1.1 1.2 1.3 1.4 1.5 2 Safety notes ...................................................................................................................12 2.1 2.2 2.3 2.4 3 3.2 3.3 3.4 Versions ...............................................................................................................16 3.1.
Contents 5.3 5.4 5.5 5.6 6 7.3 8.2 Start-up operation................................................................................................ 54 8.1.1 Prerequisites............................................................................................ 54 8.1.2 Start-up operation of system ................................................................... 55 Description of the function of the demo application............................................. 55 8.2.1 Application window ......
User Identification System 9.3 9.4 9.5 Contents 9.2.4 Data structure TFactorySettings...............................................................66 9.2.5 Data structure TModuleSettings...............................................................67 9.2.6 Data structure TRfidDeviceName.............................................................67 9.2.7 Data structure TRfidUid............................................................................68 9.2.8 Data structure for Callback..............
Contents 8 Kemro UserID classic / eco User's Manual, Version: 1.
User Identification System Introduction 1 Introduction 1.1 Purpose of the document This document describes the products Kemro UserID classic and Kemro UserID eco. This manual enables the user to operate the above-mentioned products and integrate them into the existing control and visualization system. 1.
Introduction Kemro UserID classic / eco 1.3 Intended use Kemro UserID is used in applications for user identification at industrial plants and machines. The typical applications areas include injection molding machines, robots, presses, machine tools, machines / systems in the foodstuffs/luxury foodstuffs and pharmacy industries and similar. Kemro UserID was developed, manufactured, tested and documented in accordance with the appropriate safety standards.
User Identification System Introduction 1.5 Documentation for further reading Doc.No. DE: 1000732 EN: 1000733 User's Manual, Version: 1.01 © KEBA 2008 Description Target group Kemro.userID secure+ User's manual • • • Project engineer Commissioner Service technician User's manuals Kemro.
Safety notes Kemro UserID classic / eco 2 Safety notes 2.1 Representation At various points in this manual you will see notes and precautionary warnings regarding possible hazards. The symbols used have the following meaning: ! DANGER! ! WARNING! ! CAUTION! • • • indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
User Identification System Safety notes 2.2 General safety instructions ! WARNING! • The following application areas are expressly excluded for Kemro UserID: • • • • Use in explosive or fire-risk areas Use in mining Outdoor use Kemro UserID are not allowed to be used for safety-relevant applications or safety functions (e.g. shutdown in emergency). Other products are to be used for the above applications! For further information, see EN 954-1 (EN ISO 13849-1).
Safety notes Kemro UserID classic / eco 2.3 Personnel safety instructions ! ! WARNING! Danger of personal injury due to electric shock! • Supply the Kemro UserID exclusively from power sources that have a protective low voltage (e.g. SELV according to EN 60950-1) • Connect only voltages and power circuits to connections, terminals and interfaces up to 50 V rated voltage that have a secure disconnect for hazardous voltages (e.g. with sufficient isolation).
User Identification System General product description 3 General product description Kemro UserID is a system for easy and fast identification of users of industrial plants and machines. Process-related and frequent login and logoff operations can be carried out reliably and efficiently. User data stored on a card are transferred via non-contact RFID technology to the control system of the plant or machine. The entry of passwords is no longer necessary with Kemro UserID.
General product description Kemro UserID classic / eco 3.1 Versions The product versions are basically divided into the following two groups: z "Stand-alone" versions: All Kemro UserID stand-alone products are installed well protected in rugged and compact housings. Their integration is simple and just as problem-free with regard to retrofitting existing machines.
User Identification System General product description 3.1.1 Kemro UserID classic Material No.
General product description Material No. 074227 Kemro UserID classic / eco Name Kemro UserID classic D-OEM (IC 140/D-OEM) Description RFID read/write unit • incl. sheet metal housing for evaluation unit • Serial interface • Antenna 1 (L x W = 57 mm x 53 mm) • Connecting plug: 9 pole D-SUB (female) and 2 pole male connector (supply) • without connection cable • Connection cable evaluation unit – Antenna (coax cable and LED connection cable) 3.1.2 Kemro UserID eco Material No.
User Identification System Material No. General product description Name Description 074232 Kemro UserID eco C-OEM (IE 160/C-OEM) RFID read/write unit • USB interface • Antenna 2 (L x W = 50 mm x 30 mm) • Connecting plug: USB Type B • incl.
General product description Kemro UserID classic / eco 3.2.2 Integrable version (OEM) 3.2.2.1 Kemro UserID classic / Kemro UserID eco A-OEM Scope of delivery: z Read/write unit without sheet metal housing for the evaluation unit z Antenna 2 (L x W = 50 mm x 30 mm) z Connecting cable evaluation unit -> antenna z Shield clamp with fixing screw (shield connection) Kemro UserID classic / Kemro UserID eco A-OEM 3.2.2.
User Identification System General product description 3.2.2.3 Kemro UserID classic / Kemro UserID eco C-OEM Scope of delivery: z Read/write unit with sheet metal housing for the evaluation unit z Antenna 2 (L x W = 50 mm x 30 mm) z Connecting cable evaluation unit -> antenna Kemro UserID classic / Kemro UserID eco C-OEM Information The version Kemro UserID classic OEM only differs from the shown Kemro UserID eco OEM version by the different data interfaces. 3.2.2.
General product description Kemro UserID classic / eco 3.3 Recommended transponder (RFID data carrier) Kemro UserID classic or Kemro UserID eco is for use with ISO/IEC 15693 compatible transponders (tags) designed with at least 256 bit freely writable memory. Transponders with the following transponder chips are approved: z Tag-it HF I Plus (Texas Instruments) z Tag-it HF I Standard (Texas Instruments) z I-Code SLI SL2 ICS20 (Philips) Different transponder designs can be obtained directly from KEBA.
User Identification System General product description 3.4 Spare parts and accessories 3.4.1 Connection cable Material No. on request 074212 on request 073384 070780 069145 Name Description Serial data cable, 1 m Serial data cable, 3.6 m Serial data cable, 5 m USB data cable, USB type A/type B, 2 m USB data cable, USB type A/type B, 4 m USB data cable, USB type A/type B, 4.6 m D-Sub 9-pin plug/socket, 1 m D-Sub 9-pin plug/socket, 3.6 m D-Sub 9-pin plug/socket, 5 m USB-A-USB-B 2.0 m USB-A-USB-B 4.
Mounting and installation instructions Kemro UserID classic / eco 4 Mounting and installation instructions In order to guarantee the defined range of the antenna (see chapter Technical data) and ensure an error-free operation, observe the installation instructions listed in this chapter. Information The range is largely dependent on the installation situation. (see chapter Range and detection) 4.
User Identification System Mounting and installation instructions Cut-Out 43 57 Dimension of the opening for the installation (in mm) Information The edges of the opening must be deburred to prevent damage to the device that might occur otherwise. User's Manual, Version: 1.
Mounting and installation instructions Kemro UserID classic / eco Installation 5 2 3 1 4 1. Create an opening with a size of 57 mm x 43 mm. 2. Remove the product from the packaging 3. Take off front cover (by pressing the clip 2 in the direction of the arrow) 4. Fit module (without front cover) in the opening 1. Information The wall strength of the carrier material 5 can amount to 1.5 mm and 6 mm. 5. Press in the clip of the mounting bracket and hold pressed 2 6.
User Identification System Mounting and installation instructions 4.2 Integrable versions (OEM) General installation instructions for all integrable versions: z No metal may be located in front of the antenna print (from the perspective of the user). z The larger the distance is between the antenna print and the metallic environment, the greater the range. z The back side of the antenna print and the evaluation electronics must be protected against touching by a metallic cover.
Mounting and installation instructions Kemro UserID classic / eco 4.2.1 Antenna 1 - XE020_ANT-OEM (variants B-OEM and D-OEM) 10 6,5 57 6,5 53 3,3 Antenna 1 - XE020_ANT-OEM (dimensions in mm) Information The thickness of the circuit board varies over ±10%, this must be reconsidered for mounting the circuit board into the front plate. (see following figure) 4.2.1.1 Antenna 1: Installation example 1 2 3 5 4 5 6 2 7 8 1 9 6 min.
User Identification System Mounting and installation instructions 4.2.2 Antenna 2 - X110_ANT-OEM (Versions A-OEM and C-OEM) 10 1,6 22 20,8 12,93 15,6 Antenna 2 - X110_ANT-OEM Antenna - dimensions (in mm) Information The thickness of the circuit board varies over ±10%, this must be reconsidered for mounting the circuit board into the front plate. 4.2.2.1 Antenna 2: Installation example 6 2 4 5 1 2 3 min. 25 mm 25 35 4 5 6 50 63 1 ... Front film (plastic) 2 ... Front plate 3 ...
Mounting and installation instructions 30 Kemro UserID classic / eco User's Manual, Version: 1.
User Identification System Mounting and installation instructions 4.2.3 Evaluation unit without housing (versions A-OEM and B-OEM) 70 4 4 50 4 4 42 Dimensions of the evaluation unit without housing (versions A-OEM and B-OEM) (dimensions in mm) 4.2.3.1 Evaluation unit without housing - installation example 2 1 2 4 10 3 1 2 3 4 Evaluation unit (print) Screw Spacer bolts Carrier material Evaluation unit without housing - installation example User's Manual, Version: 1.
Mounting and installation instructions Kemro UserID classic / eco 94 84 4, 5 74 4.2.4 Evaluation unit with housing (versions C-OEM and D-OEM) 54 Dimensions of the evaluation unit with housing (versions C-OEM and D-OEM) (dimensions in mm) 4.2.4.1 Installation The evaluation unit with housing can be screwed to any level carrier material using 2 M4 screws. 32 User's Manual, Version: 1.
User Identification System Show, connections and wiring 5 Show, connections and wiring 5.1 Status LED A three-color status LED to display the status is mounted on the housing front of the stand-alone version or on the antenna module of the integrated versions (OEM). Information The conditions of the status LED are described in chapter Diagnosis. 5.2 Connections 5.2.
Show, connections and wiring Kemro UserID classic / eco 5.2.2 Kemro UserID classic C-OEM / D-OEM 1 24/12V LED 0V RS232 2 4 ANT 3 1 … Voltage supply 24/12 V (2-pole plug) 2 … Serial interface (D-Sub socket 9-pole) 3 … ANT, plug for antenna cable 4 … LED, plug for status LED Kemro UserID classic C-OEM / D-OEM 5.2.3 Kemro UserID eco (stand-alone) 1 USB 1 … USB interface (type B) Kemro UserID eco, back view 34 User's Manual, Version: 1.
User Identification System User's Manual, Version: 1.
Show, connections and wiring Kemro UserID classic / eco 5.2.4 Kemro UserID eco C-OEM / D-OEM LED USB 1 3 ANT 2 1 … USB interface (type B) 2 … ANT, plug for antenna cable 3 … LED, plug for status LED Kemro UserID eco C-OEM / D-OEM 5.2.
User Identification System Show, connections and wiring 5.2.6 Antenna 1 (XE020_ANT-OEM) 2 1 1 … ANT … connection for antenna cable 2 … LED ... Connection for status LED cable Antenna 1 (XE020_ANT-OEM) 5.2.7 Antenna 2 (X110_ANT-OEM) 2 1 1 … ANT, connection for antenna cable 2 … LED, connection for status LED cable Antenna 2 (X110_ANT-OEM) User's Manual, Version: 1.
Show, connections and wiring Kemro UserID classic / eco 5.3 Shield clamp Information The shield clamp is used for grounding and must never be used as strain relief. 5.3.1 Attaching the shield clamp Proceed as follows to connect the cable to the terminal block and subsequently attach the shield clamp: 1. Strip the insulation off the cable end. 2. Fold back the shielding braid and shielding foil. 3. Attach conductive textilebacked strip. 4. Strip the insulation off the pins. 5.
User Identification System Show, connections and wiring 5.4 Power supply 5.4.1 Kemro UserID classic All Kemro UserID classic modules can be optionally supplied with +24 V DC or +12 V DC. Depending on the module version, the voltage supply occurs either via a plug or a terminal block.
Show, connections and wiring Kemro UserID classic / eco 5.4.2 Kemro UserID eco All Kemro UserID eco modules are supplied with voltage directly via the USB interface. Kemro UserID eco modules can only be connected to USB devices that fulfill the high power standard, i.e. a voltage supply of 500 mA is guaranteed. 5.5 Serial interface RS-232 (Kemro UserID classic) 5.5.
User Identification System Show, connections and wiring Cable length tested up to 30 m Minimum bend radius Minimum bend radius during installation: 60 mm Minimum bend radius for installed cable: 50 mm 5.5.2 Kemro UserID classic A/B-OEM 1 6 Terminal block S1 Terminal 1 2 3 4 5 6 Description +24/12V 0V (GND) CTS RxD TxD RTS 5.5.2.1 Cable and plug specification: Cable type Shielded standard cable.
Show, connections and wiring Kemro UserID classic / eco 5.6 USB 2.0 interface (Kemro UserID eco) Kemro UserID eco is a high-power USB device and has a standard USB 2.0 interface. The USB master interface to which the Kemro UserID eco - module is connected must be able to supply this with 500 mA (highpower). 5.6.1 USB interface for Kemro UserID eco C-OEM / D-OEM 2 1 3 4 USB interface type B Pin 1 2 3 4 Description Vbus (+5V) DD+ 0 V (GND) 5.6.1.
User Identification System Show, connections and wiring 5.6.2 USB interface for Kemro UserID eco A-OEM / B-OEM 1 6 Terminal block S1 Terminal 1 2 3 4 5 6 Description 0V (GND) D+ D0V (GND) 0V (GND) 5V 5.6.2.1 Cable and plug specification: Cable type Shielded USB cable, twisted pair data cables with a characteristic impedance of 90 Ohm +/- 15%. Plug type Standard USB connector type B with fully conductive shell. The cable shielding must be connected plane with the shield cover of the plug.
Installation Kemro UserID classic / eco 6 Installation Generally the Kemro UserID can be integrated with every system that, depending on the product version, has a serial interface or USB interface with a host function (master) and is supported by the operating system. The device drivers supplied are suitable for the following operating systems: z Microsoft Windows XP z Microsoft Windows XP emb. z Microsoft Windows CE 5.
User Identification System Installation 6.2 Installation with Microsoft Windows 2000/2003 Server/XP/XPemb/Vista 1.) Start target system. 2.) Insert Kemro UserID installation CD into the CD drive. 3.) Start installation by calling up the file INSTALL_device_driver.cmd (directory \drivers\Win_XP_Vista). 4.) Re-start system. The drivers necessary for operation are installed and Kemro UserID can now be used from all windows-based application development systems. 6.
Installation Kemro UserID classic / eco 6.3.2 Later installation / installation outside the Windows CE image 1.) Start target system. 2.) Copy the files SIUSBXP.dll SIUSBXP_LIB.dll UIDDRV_RfbCommUsb.dll UIDDRV_RfbMaster.dll UIDDRV_RfbInterface.dll UIDDRV_RfidInterface.dll UIDDRV_RfidService.dll of directory \drivers\win_ce into a nonvolatile directory (e.g. flash drive, a hard disc or a battery-buffered Ram) 3.) Take over the registry entries of file UIDDRV_Win32ce_RfidService.
User Identification System Installation 6.3.3 Module settings for the operation with Windows CE In order to keep the system capacity low with the use of the device driver, we recommend setting the inventory cycle (cycle time with which the module is polled by the driver via identified cards) to 300 ms (default value: 50 ms). This setting can be carried out using the demo application (see chapter Tab Settings).
Operating behavior Kemro UserID classic / eco 7 Operating behavior 7.1 Start-up behavior During the startup of the Kemro UserID module, states are displayed in the following order by the status LED: Step 1 Display off (continuous) 2 3 red (continuous) orange (continuous) 4 green / orange (blinking) Description Only for Kemro UserID eco: Module from device driver not yet detected and switched on.
User Identification System Operating behavior 7.
Operating behavior Kemro UserID classic / eco Information For a detailed description of the individual status messages, see the chapter Call-up actions of the Event Callback. The operating behavior of the started up Kemro UserID modules is dependent on their configuration.
User Identification System Operating behavior 7.2.1 Activation modes for status LED Two operation types result by the setting of the parameter dwLedControlMode for the signaling of the Kemro UserID modules through the status LED: z Operation type 0 (status on delivery) The device driver controls the status LED according to the schema shown below. The read/write functions on the status LED from the application remain without effect. LED signals LED green (continuous) LED green (blinking, max. 3 sec.
Operating behavior Kemro UserID classic / eco 7.2.2 Validity test The setting of the parameter boolCheckValidation determines whether the transponder is checked for validity according to the Euromap 65 guideline. Through this setting, different call actions of the callback function become effective (see chapter Call-up actions of the Event Callback). z z TRUE (status on delivery) Validity of a detected transponder is checked according to the Euromap 65 guideline.
User Identification System Operating behavior 7.3 Range and detection The range between transponder and the Kemro UserID module is dependent on the installation situation, the antenna size (with OEM versions) and the transponder used. The range increases if the antenna (for OEM versions) or the stand-alone module are installed in non-metallic materials. In addition, the range increases if a sufficiently large surface is available for the transponder antenna.
Demo application Kemro UserID classic / eco 8 Demo application The demo application is a complete application with which the Kemro UserID can be put into operation quickly and easily on systems with Microsoft Windows. The demo application is a practical application for reading out and writing on transponders in Euromap 65 or binary form. The demo application can be used to configure Kemro UserID modules and to test different functions. 8.1 Start-up operation 8.1.
User Identification System Demo application 8.1.2 Start-up operation of system 1.) Installation of the device driver. See chapter Installation with Microsoft Windows 2000/2003 Server/XP/XPemb/Vista 2.) Installation of .NET Framework 2.0, if it is not already in the target system. This setup can also be called up from the CD-ROM at: /drivers/Framework 2.0/dotnetfx.exe 3.) Connect the Kemro UserID modules with target system and ensure the power supply of the modules. 4.
Demo application Kemro UserID classic / eco Kemro UserID demo application - application window Description of the elements Element Read Description Reading out user data from the selected transponder and displaying it according to the selected format in binary form or Euromap 65 form. Note: The button can only be operated when at least one valid card has been recognized by the Kemro UserID module. Write Writing user data on the selected transponder in the format selected.
User Identification System Element read valid tags automatically Demo application Description When selecting this option a transponder that is valid according to the Euromap 65 standard and within receiving range is automatically read out. The tab page Read / Write Euromap 65 Data is displayed automatically. A further transponder can only be automatically read when the current transponder has left the receiving range.
Demo application Kemro UserID classic / eco Description of the mask The type of display (text / byte) and the number of bytes to be read out from the transponder's user memory can be set in upper sector of the tab page. Two fields are located below this. The left text field displays the user data read out from the transponder. The right input field is used to enter data that can be subsequently written into the user memory of the transponder.
User Identification System Demo application 8.2.3 Tab page Read/Write Euromap 65 Data Purpose On this tab page data in Euromap 65 format can be read out from or written onto the transponder. Information The Euromap 65 Standard is specifically matched to the requirements of user identification on machines and plants. Additional information can be found in the Internet at http://www.euromap.org/. 0H H Description of the mask On this tab page the user data acc. to the Euromap65 standard are displayed.
Demo application Kemro UserID classic / eco Element Description Preferred language Language code of preferred language according to ISO 639-2/B (3-digit, e.g. eng for English). Country code Country code acc. to ISO 3166-1 (2-digit, e.g. GB for United Kingdom). Factory identifier Company code (note: a distinction is made between upper and lower case letters in the input).
User Identification System Demo application Description of the mask On this tab page all the configuration parameters of a Kemro UserID module are displayed. The connected options are displayed in their own sector with a surrounding border. Each parameter can be modified by an entry or a selection. Kemro UserID demo application - tab settings Description of the elements Element Description Get settings Reading out settings.
Demo application Kemro UserID classic / eco Element Description Inventory cycle [ms] The cycle time with which the module searches for new transponders in the detection range (typical value: 50 ms). After the corresponding Change button is pressed this setting is changed. Safety key Key (32-bit safety key) for calculating the safety code acc. to the Euromap 65 standard.
User Identification System Function interface of device driver 9 Function interface of device driver With the aid of the Kemro UserID simple and easy integration into existing visualization systems is possible. This chapter describes the commands of the device driver of the Kemro UserID for accessing the module and transponders recognized by the module. 9.1 Data format Data can be stored on the RFID transponder either in Euromap 65 format, or in binary form. The format is set by the write command used.
Function interface of device driver Kemro UserID classic / eco 9.2.1 Data structure TEuromapData This chapter describes all data elements which correspond to the optional Euromap65 parameters. Data element DWORD TEuromapData::dwValid Euromap 65 ID # -- Description Switches the following structure entries valid or invalid. A set bit means that the data entry is filled during reading and taken over during writing. If the bit is not set, the corresponding structure entry is not used.
User Identification System Data element char TEuromapData::strCountryCode Function interface of device driver Euromap 65 ID # 0x04 Description Country code of user It is recommended to store the language code in line with ISO1/B. Note: The length by 1 byte larger than in Euromap defines due to 0termination, further bytes due to alignment of the structure.
Function interface of device driver Kemro UserID classic / eco 9.2.2 Data structure TEuromapOEMData This data structure is used to specify further free Euromap65 entries in the Euromap65 format (ID 203-255). Data element BYTE TEuromapOEMData::bEuromapID Euromap 65 ID # Description Specific machine manufacturer parameters (these are issued exclusively by the EUROMAP organization, http://www.euromap.
User Identification System Function interface of device driver 9.2.5 Data structure TModuleSettings This data structure is used for reading and writing the setting data of an RFID module. Data element Euromap 65 ID # Description DWORD TModuleSettings::dwInventoryRequestCycle -- Cycle time for searching the new transponders DWORD TModuleSettings::dwLedControlMode -- Specification of who controls the LEDs (default: 0): • 0: driver takes over control. • 1: the application takes over control.
Function interface of device driver Kemro UserID classic / eco 9.2.7 Data structure TRfidUid This data structure is used in connection with the clear identification of a transponder. Data element Euromap 65 ID # unsigned char TRfidUid::uid -- Description Clear transponder ID 9.2.8 Data structure for Callback The Event Callback is used to signal transponder or device actions.
User Identification System Function interface of device driver 9.3 Enumeration types 9.3.
Function interface of device driver Kemro UserID classic / eco 9.
User Identification System Function interface of device driver Constant Value Description EUROMAP_ID_USERID_TEXTUAL 0x02 UserId-Textual entry EUROMAP_ID_EXPIRY_DATE 0x03 Expiry-Date entry EUROMAP_ID_PREFERED_LANGUAGE 0x04 Language and Country-Code entry EUROMAP_ID_FACTORY_ID 0x05 FactoryID entry EUROMAP_ID_ACCESS_RIGHTS 0x06 Access-Rights entry EUROMAP_ID_KEBA_USER_LEVEL 0xc9 User-Level entry EUROMAP_ID_KEBA_REPRODUCTION_ID 0xca ReproductionId entry 9.5 Functions 9.5.
Function interface of device driver Kemro UserID classic / eco 9.5.2 Read out list of currently connected Kemro UserID modules DWORD rfidGetDeviceList (TRfidDeviceName rsDeviceName[], DWORD * pdwCount) Parameter rsDeviceName pdwCount In Description String list in which the automatically generated symbolic names of the Kemro UserID modules are written Length of string list Out: Number of entered RFID modules This function lists all Kemro UserID modules found (independent of connection, USB or RS232).
User Identification System Function interface of device driver 9.5.5 Controlling the LED of the Kemro UserID module DWORD rfidSetLedStatus (HANDLE hDevice, TRfidLedStatus eStatus, TRfidLedColor eColor) Parameter Description Handle on the Kemro UserID module whose Led is to be controlled Operating status of the LED.
Function interface of device driver Kemro UserID classic / eco 9.5.7 New settings for the Kemro UserID module DWORD rfidSetModuleSettings (HANDLE hDevice, TModuleSettings * psModuleSettings) Parameter hDevice psModuleSettings Description Handle on the Kemro UserID module New setting data of the Kemro UserID module The current device driver settings are set for this Kemro UserID module. Return: Value Description If everything is OK, otherwise descriptive error code 0 9.5.
User Identification System Function interface of device driver Return: Value Description If everything is OK, otherwise descriptive error code 0 9.5.10 Opening a connection to a specific transponder DWORD rfidOpenTag (TRfidUid sUid, DWORD dwFlags, HANDLE * phTag) Parameter Description UIDs of the transponder to be opened Data mode in which the transponder is to be opened • FLAG_OPEN_EUROMAP65: opens the connection in the Euromap65 standard, i.e.
Function interface of device driver Kemro UserID classic / eco 9.5.12 Reading out data from a transponder DWORD rfidReadTag (HANDLE hTag, void * pvData, DWORD dwCount, DWORD * pdwCountRead) Parameter Description hTag pvData Handle of the transponder to be read Buffer for the data read out. The data have the following format, depending on the data mode in which the transponder was opened: • FLAG_OPEN_EUROMAP65: a data buffer in the form of a T_EuromapData structure is expected.
User Identification System Function interface of device driver 9.5.13 Writing data of a transponder DWORD rfidWriteTag (HANDLE hTag, void * pvData, DWORD dwCount, DWORD * pdwCountWritten) . Parameter hTag pvData dwCount pdwCountWritten Description Handle of the transponder to be written Buffer that contains the data to be written.
Diagnosis Kemro UserID classic / eco 10 Diagnosis The following states can be signaled with the status LED: Display LED off Description Kemro UserID module is not supplied Only with Kemro UserID eco: The module has not yet been detected by the device driver or the device driver for the module has not been installed yet.
User Identification System Maintenance and repair instructions 11 Maintenance and repair instructions 11.1 Maintenance This device does not require regular maintenance. 11.2 Repair A defective device may only be repaired by KEBA specialists, otherwise the warranty claim expires. This is to be sent to KEBA in a suitable transport packaging. 11.2.1 Packaging, shipment The module is wrapped in protective packaging material for shipment.
Disposal Kemro UserID classic / eco 12 Disposal 12.1 Disposal of the module 80 • The symbol with the crossed-out rubbish bin indicates that electrical and electronic devices including their accessories should not be disposed of in the household garbage. • Depending on their coding, the raw materials are recyclable.
User Identification System Technical data 13 Technical data General information Power consumption: (Kemro UserID eco) Power consumption: (Kemro UserID classic) Reading range: Supported transponders: Signaling: Device driver for the operation systems: Max. 0.75 W Max.
Technical data Kemro UserID classic / eco Transportation and Environmental conditions Operating temperature: Storage temperature: Relative humidity of air: Vibration resistance: Shock resistance: +0 °C to +65 °C (OEM variants) +5 °C to +55 °C (stand-alone variant) -25 °C to +70 °C 5 % to 95 % (non condensing) according to EN 61131-2 according to EN 61131-2 13.
User Identification System EC directives and standards 14 EC directives and standards 14.1 EC Directives Directive 1999/5/EG Directive 2002/95/EG R&TTE Directive (Radio & Telecommunications Terminal Equipment) RoHS directives 14.2 Standards The following, legally non-binding European standards, were applied in order to check that the Kemro K2 System conforms with the Directives. 14.2.
EC directives and standards Kemro UserID classic / eco 14.2.3 Environmental and surrounding conditions EN 61131-2 IEC 60068-2-6 IEC 60068-2-27 Stored-program controls – Part 2 Vibration, test FC Shock 14.3 Standards for the American market 14.3.1 UL test for industrial control equipment UL 508, 2005 Industrial Control Equipment CFR 47 Part 15 Radio Frequency Devices 14.3.2 FCC 14.3.2.1 FCC Requirements The device complies with Part 15 of the FCC Rules.
