User manual

Installation
19/48
4.2.2 Removingtheconnectorpanelcover
Removingtheconnectorpanelcover…
Unscrewthefourscrewsthatmounttheconnector
panelcoverandremovetheconnectorpanelcover.
Takethesilicabagoutoftheterminalpaneland
disposeofitproperly.
Informationforsubsequentassembling
Mountingtheconnectorpanelcover…
Inserttheconnectorpanelcoveragain.
Mounttheconnectorpanelcoveragainusingthe
fourscrews.
Enclosuremarking…
Tightenthe4screwsuntiltheenclosuremarkingon
theconnectorpanelcoverisflushwiththeenclo
sure.
Theconnectorpanelcovermustsealtheenclosure
properly.
Selftappingscrewsrequiremoreforce(min.2.5
Nmtomax.5Nm).