User manual

Installation
22/48
4.4 Mountingthechargingstation
Installationmaterials
Theincludedinstallationmaterial(excludingeseries)issuitableforcement,brickandwood(withoutan
chors).Forothersurfaces,asuitablemethodofinstallationmustbeselected.
Dependingonthedevicemodelorforspecialmaterials,theinstallationmaterialsmustbeprovided
bythecustomer.Aproperinstallationisabsolutelynecessaryandliesoutsideofthescopeofre
sponsibilityoftheKEBAAG.
Pleasealsoobservethefollowingmanufacturerinstructions:
Instructionsforplacinganchorsandbolts.Source:Fischer
Markingtheholes…
Markthefourholes[1]to[4]usingthesupplied
drillingtemplateandaspiritlevel.
Drillthefourmountingholes.
Informationaboutthedrillingtemplate:
● Thedrillingtemplateshowstheoutercontourof
thechargingstation.
● Thefourmainmountingholesarealignedcentered
totheslottedholesonthedevice.
● Thethreeholesintheupperrightshowthearea
forthecableinsertionsandhelptobeabletoalign
themountingpositionofthedevicetothecables.
● Thetwonotchesonthetopsideareusedforalign
ingthedevicetotheconnectionlines.
● Inthelowerpart,theholesfortheoptionalcable
hangercanbedrilledappropriatetothedevice.
Thispartcanbeseparatedifthecablehangeris
notmountedoristobemountedatadifferentlo
cation.