User manual

Installation
33/48
LSA+®insertiontool
OriginalKRONEinsertiontoolwithsolderfreeand
strippingfreeconnectionofthewiresandsimultaneous
trimmingoftheresiduallengths.
Preparingtheconnectioncable…
Striptheconnectioncableapproximately6cm.
Foldbackapprox.1cmofshieldedbraidingcom
pletelyandwrapitwithconductiveadhesivetextile
tape.
Connectingthecable…
Fixtheconnectingcableatthepointofthewrap
aroundshieldingbraidinthecableclamp[K].
Thecableclampmustbescrewedontotheground
point[GND]ofthecircuitboard.
Clampthewirestotheterminalblock[ETH]using
theinsertiontool.