User manual

Installation
34/48
4.6 DIPswitchsettings
ChangestotheDIPswitchsettingsonlybecomeeffectiveafterarestartofthechargingstation!Todothis,
pressthe[servicebutton]for1secondorswitchthepowersupplyvoltageoff/on.
DIPswitches…
TheDIPswitchesareusedfortheaddressingandcon
figuringthechargingstationandarelocatedunderthe
connectorpanelcover.
[DSW1]…Configuration(DIPswitchup)
[DSW2]…Addressing(DIPswitchdown)
DIPswitchexamplesetting…
Forbetterexplanation,thefigureshowsthepositionof
theDIPswitchesforthestatesONandOFF.
CONTROLFUNCTIONSOFTHECHARGINGSTATION
Function DIPswitch Figure
Externalenableinput[X1]isused(forde
tails,seeChapter"4.5.3Enableinput[X1]
(excludingeseries)“.
D1.1 ON=yes
Switchcontactoutput[X2]isused(forde
tails,seeChapter"4.5.4Switchcontactout
put[X2](excludingeseries)“.
D1.2 ON=yes
ActivateSmartHomeInterfaceviaUDP(for
detailssee“UDPProgrammersGuide”)
D1.3 ON=yes