User manual

Additionaltechnicalinstructions
40/48
5 Additionaltechnicalinstructions
5.1 ProgrammingRFIDusercards(optional)
ProgrammingtheRFIDmastercard
TheauthorizationbyanRFIDmastercardisnecessaryfortheprogramming.Theprogram
mingmodecanbeactivatedanddeactivatedusingtheRFIDmastercard.
ThefirstRFIDcardthatisdetectedbythechargingstationwillautomaticallybestoredasthe
mastercard.
HoldtheRFIDmastercardtobeprogrammedinfrontoftheRFIDsensorandwaitforthesignaltone.
TheRFIDmastercardisnowprogrammed.Keepthiscardinasafeplace.
ProgrammingRFIDusercards
HoldtheRFIDmastercardinfrontoftheRFIDsensorandwaitforthesignaltone.
HoldthenewRFIDusercardinfrontoftheRFIDsensorwithin5secondsandwaitforthesignaltone.
Toconfirm,holdtheRFIDmastercardinfrontoftheRFIDsensoragainwithin5secondsandwaitfor
thesignaltone.
TheRFIDusercardisnowprogrammed.
DeletingallRFIDcardsfrommemory
Removethehousingcoverandopentheconnectorpanelcoverofthechargingstation.
Pressthe[servicebutton]for5seconds.
AllsavedRFIDcards(includingmastercard)arenowdeleted.
NowstartagainwiththeprogrammingoftheRFIDmastercard.
DeactivatingtheRFIDfunction
Removethehousingcoverandopentheconnectorpanelcoverofthechargingstation.
Pressthe[servicebutton]for5seconds.
AllsavedRFIDcards(includingmastercard)arenowdeleted.
TheRFIDfunctionisdeactivatedifnoRFIDcardisheldinfrontofthesensorforthenext60seconds.
Afterdeactivation,thestatusdisplaychangesfrombluetogreen.