User manual

Additionaltechnicalinstructions
41/48
5.2 ConfiguringthecommunicationwiththeelectricvehiclePLC
>Ethernet(optional)
TograntthevehicleaccesstothehomenetworkortheInternet,thepowerlinecommunicationbetweenvehi
cleandchargingstationmustbeconfiguredonbothsidesusingthesamepassword(NMK"NetworkMem
bershipKey").
Thestandardpasswordis"emobility".Werecommendchangingthispassword.
Therequiredsoftware("EVCommunicationAssistant")incl.instructionsfortheconfigurationofthecharging
stationcanbefoundintthedownloadareaatwww.kecontact.com.
Fordetailsonsettingupthevehicle,pleasereferthemanufacturer'sinstructionsforyourvehicle.
5.3 Replacingthefuse
Thefollowingfusemustbeused:
Designation Current/Voltage Type Dimensions
F1 3.15A/250V Slowblowwithhighbreaking
capacity(>1500A)(T)(H)
5x20mmfuse
Replacingthefuse…
Switchoffthepowersupplylineofthechargingsta
tioncompletely.
Removetheconnectorpanelcover.
Pressaflatheadscrewdriverintotheopeningofthe
fuseholder.
Turnthefuseholdercounterclockwiseuntilthe
springpushesoutautomatically.
Replacethefuse.
Pushthefuseholderinandretightenintheclock
wisedirection.