User manual

Additionaltechnicalinstructions
43/48
5.5 Technicaldata
Electricaldata
Cablefeed: Surfacecableroutingorflushtypecablerouting
Connectioncrosssection: Minimumcrosssection(dependingonthecableand
thelinelength):
5x2.5mm²(16Anominalcurrent)
5x6.0mm²(32Anominalcurrent)
Supplyterminals: Connectionline:
Fixed(min.max):0.2–16mm²
Flexible(min.max):0.2–16mm²
AWG(min.max):24–6
flexible(min.max)withwireendsleeve
without/withplasticsleeve:
0.25–10/0.25–10mm²
Supplyterminalstemperaturerating: 105°C
Nominalcurrent(configurableconnectionvalues): 10A,13A,16A,20A,25Aor32A
3phaseor1phase
Mainsvoltage(Europe): 230V
230/400V3N~(excludingeseries)
Mainsfrequency: 50Hz/60Hz
Surgecategory: IIIaccordingtoEN60664
Ratedshorttimecurrentresistance: <10kAeffectivevalueaccordingtoEN614391
Fuseprotection(inthehouseinstallation): Thefuseprotectionmustoccuraccordingtothelo
callyvalidregulations,dependentonthesocketver
sions/cableversions(seetypeplate).
Residualcurrentcircuitbreaker
(inthehouseinstallation):
FII
ΔN
=30mATypeA,sensitivetopulsatingcurrents
I
N
dimensionedaccordingtothefuse
Socketversions: Type2standardsocket32A/400V
AC
accordingtoEN621961andVDEARE262322
Cableversions:
(Ratingseetypeplate)
Type1cable:upto32A/230V
AC
accordingtoEN621961andSAEJ1772
Type2cable:upto32A/400V
AC
accordingtoEN621961andVDEARE262322
Protectionclass: I
IPprotectionratingfordevice: IP54
Protectionagainstmechanicalimpact: IK08(exceptforcylinderlock)