User manual

Using the charging station
11 / 20
3.2 Charging station with charging cable
Charging station (application example)
Typical version with charging cable
[A]… Status LED
[B]… Parking bay for charging plug
[C]… Housing cover
[D]… Hanger for charging cable
Storing the charging plug/charging cable
If no charging procedure is being performed,
the charging plug can be plugged into the park-
ing bay [B] for safe storage.
The charging cable can be coiled up and placed
on the hanger [D].
Note
Depending on the design of the charging sta-
tion, the parking bay may deviate from the form
shown.
Starting the charging procedure
Status LED
► The charging cable is not
plugged into the vehicle.
The charging station must be ready for operation, the status
LED flashes green slowly every 3 seconds ("Ready for opera-
tion").
► Plug the charging cable into
the vehicle.
The status LED lights up green continuously ("Ready for charg-
ing"). The charging procedure can be started by the vehicle
from this point of time; then the status LED flashes green
("Charging procedure").
Ending the charging procedure
The charging procedure is ended by unplugging the charging cable at the vehicle. For details, please
refer to the instructions of the vehicle manufacturer.
► Disconnect the charging cable from the vehicle ("Wait for unplugging").
► Store the charging cable on the provided hanger of the device.