User manual

Using the charging station
13 / 20
Flashes orange slowly
every 5 seconds
Temperature limit exceeded (charging procedure temporarily interrupted;
charging continues after cooling down)
Flashes red
Malfunction (for details, see "Troubleshooting")
Segment 1 lights up
orange
RFID programming mode (RFID cards can be programmed in this mode.
For details, see "Programming RFID user cards")
Segment 2 lights up
orange
Commissioning mode
(the charging station is in commissioning mode)
3.4 Authorization (optional)
An (optional) authorization of a user for charging at the charging station can either
occur with a key switch or by means of RFID user cards depending on the de-
vice version.
Authorization required:
The status LED flashes blue slowly every 3 seconds.
Authorization successful:
A successful authorization will be indicated by a series of increasing tones.
Authorization failed:
A failed authorization will be indicated by a series of decreasing tones.
Note
After successful authorization, if the charging procedure is not started within 60 seconds, the au-
tomatic enable expires.