User manual

Authorization process
17/112
Inserting the cylinder lock
Turn the key 180° so that the lock nose faces
downward.
Use light pressure to press the cylinder lock into the
housing completely until it audibly engages.
The cylinder lock should be flush with the surface of
the housing.
Engaging the cylinder lock
Turn the key to the right until the resistance is no-
ticeably overcome and the key can be removed.
Do not turn the key past the [MAX] position.
The key switch is now ready for use.
Removing the cylinder lock
Turn the key to the left until the resistance is notice-
ably overcome.
Turn the key further until it is located in the vertical
position.
The cylinder lock can now be unlocked from the
holder using slightly increased force and removed.
en