User manual

Additional technical instructions
38/44
5 Additional technical instructions
5.1 Programming RFID cards (optional)
Note
If you have a device version with RFID function, then please follow the programming instructions in
the "Authorization functions" manual.
5.2 Communication with the electric vehicle PLC->Ethernet
(optional; P20 only)
To grant the vehicle access to the home network or the Internet, the powerline communication between vehi-
cle and charging station must be configured on both sides using the same password (NMK "Network Mem-
bership Key").
The standard password is "emobility". We recommend changing this password.
The required software ("EV Communication Assistant") incl. instructions for the configuration of the charging
station can be found in the download area at www.kecontact.com.
For details on setting up the vehicle, please refer the manufacturer's instructions for your vehicle.
5.3 Replacing the fuse
Fuse Current / Voltage Type Dimensions
F1 3.15 A / 250 V Slow-blow with high breaking
capacity (>1500 A) (T) (H)
5 x 20 mm fuse
Replacing the safety fuse
Switch off the power supply line of the charging sta-
tion completely.
Remove the connector panel cover.
Press a flathead screwdriver into the opening of the
fuse holder.
Turn the fuse holder counterclockwise until it is
pushed out automatically by the spring.
Replace the fuse.
Push the fuse holder in and retighten in the clock-
wise direction.