User manual

Overview

13/112

1 Overview

This manual is an expansion of the "user manual". You must comply with all instructions and

safety information in the user manual!

Install the charging station according to the "installation manual".

1.1 Status LED

Status LED - segments

The status LED provides information about the current

operating state of the charging station. It consists of 4

segments (S1 to S4), which can light up or flash, to-

gether or individually, in various colors.

The status LED is only visible when the power is

switched on.

If not otherwise specified, all 4 segments light up to-

gether.

Status LED Function

Flashes slowly

every 3 sec-

onds

blue Authorization is required (charging station was not authorized correctly;

authorization with RFID, key switch or external enable required)

Lights up con-

tinuously

blue External enable still required (authorization with RFID or key switch car-

ried out; vehicle connected correctly; external enable on the enable input

still required)

Segment 1 lights up orange RFID programming mode (RFID cards can be programmed in this mode.

For details, see Chapter "↪ 2.2 Programming RFID cards (optional)

[15]".)