User manual

Authorization process
14/112
2 Authorization process
RFID sensor
The RFID sensor [R] is used for touchless authoriza-
tion of a user with MIFARE cards or tags according to
ISO14443.
Key switch
The key switch [S] is used for authorizing a user with a
key.
2.1 Authorization (general procedure)
An authorization of a user for charging at the charging station can either occur with a key
switch or by means of RFID user cards depending on the device version.
Authorization required
The status LED flashes blue slowly every 3 seconds.
Authorization successful
A successful authorization will be indicated by a series of increasing tones.
Authorization failed
A failed authorization will be indicated by a series of decreasing tones.
Note
After successful authorization, if the charging procedure is not started within 60seconds, the au-
tomatic enable expires.