User manual

Installation
28/44
Example (supplement to the circuit diagram):
The switch contact output can be used to switch off the charging station (disconnect the current) by means of
an overriding disconnect solution.
-Q1 ... Main switch -Q2 ... Line circuit breaker + RCD circuit breaker
-Q3 ... Contactor/relay -F1 ... Current-limiting equipment
-U1 ... Undervoltage trigger -X2 ... Switch contact output
4.5.5 Terminals [X1/X2] (excluding e-series)
Terminals…
The terminals for the enable input [X1] and the switch
contact output [X2] are designed as spring-type termi-
nals.
Terminal data:
- Cross section (min.-max): 0.08 – 4 mm²
- AWG (min.-max): 28 – 12
- Insulation stripping length: 8 mm
- Flathead screwdriver 3.0 mm