User manual

Installation

37/44

4.7.5 Mounting the housing cover

Fitting the housing cover…

Fit the housing cover at the top and push the cover

downwards slightly.

Make sure that the housing cover is seated cor-

rectly at the top in the housing guides.

Mounting the housing cover…

Then fold the housing cover to the rear. The hous-

ing cover must glide into the guides without consid-

erable resistance.

Make sure that the housing cover is seated cor-

rectly on all sides in the housing guide.

Only a minimum, even gap may be present.

Cover screws…

Secure the housing cover at the bottom using the

two mounting screws[S].