User manual

Installation

21/44

Water drainage

The water drainage from the top side to the rear side of

the charging station must be ensured. Therefore, ob-

serve the following:

● Only a vertical installation of the charging station is

permitted.

● The charging station must be mounted at an angle

of 90° (no inclination is permitted!).

Mounting the charging station…

Turn the hanger bolts into the anchors until the

thread still protrudes approx.2cm ('x').

Use the shims [A] to compensate for any uneven-

ness and to ensure a water drainage behind the de-

vice.

Position and mount the charging station using the

supplied washers and nuts.

[A]…Shim

[B]…Charging station housing

[C]…Washer

[D]…Nut

Installation on cavity walls

For installation on cavity walls, at least 2 mounting

screws must be secured to a support element of the

wall (see figure).

Special cavity-wall anchors must be used for the other

mounting screws.

When installing on cavity walls you must ensure that

the bearing strength of the construction is sufficient.