User manual

Important information
6/44
ATTENTION
Risk of damage!
● Make sure that the charging station is not damaged by improper handling (anchoring,
housing cover, socket, inner parts etc.).
● Do not open the connector panel cover in the rain or when mounting outdoors.
● Risk of breaking the plastic housing!
- Countersunk screws may not be used for the mounting!
- The washers supplied must be used.
- Do not tighten the mounting screws with force.
- The mounting surface must be completely level (max. 1 mm difference between the
support points or mounting points). Warpage of the housing must be prevented.
ESD
Information for technicians who are permitted to open the device:
Risk of damage! Electronic components can be destroyed if touched!
● Before handling the modules, touch a grounded metal object in order to discharge any
static electricity from your body.
CAUTION!
5 safety rules:
-Shut down all poles and all sides!
- Secure against reactivation!
- Check that the equipment is voltage-free!
- Provide earthing and short-circuit protection!
- Cover adjacent live parts and restrict access to hazardous areas!
Not observing the safety instructions can result in risk of death, injuries and damage to the
device! KEBA AG assumes no liability for claims resulting from this!