Datasheet

KTC, KTF, KTP
Page 1(4)
Linear sensor 75-1000mm
2013-03-25, specications subject to change without notice
REGAL COMPONENTS AB • LEFFLERSGATAN 1 • SE-754 50 UPPSALA • SWEDEN
[phone] • WWW.REGAL.SE • [e-mail]
Potentiometric transducer with conductive track
suitable for measurement, monitoring and control of
mechanical strokes. Critical in providing a smooth
output, mechanically dependent on
the stable glide of the shaft and wiper
on the element’s surface.
Applications such as industrial
controls, robotics, process systems or
replacement of a linear voltage
differential transformer (LVDT) are ideal
uses for this versatile, reliable model.
The transducer is also available with built in signal converter
with 4-20 mA output. The mechanical design for that version is
the same.
KTC and KTF has a DIN 43650 ISO 4400 connector and KTP
use a M12 standard contact.
Specifications
Supply voltage < 40 V
DC
Output signal Potentiometer / 4-20 mA
Resolution unlimited
Linearity
≤400 mm stroke <±0.07% FS
>400 mm stroke <±0.05% FS
Repeatability <±0.013 mm
Wiper current
recommended < 1 µA
Temperature
potentiometer output -55°C…+125°C
4-20 mA output -40°C…+85°C
Material
housing
rod
Aluminium
Stainless steel
Encapsulation IP 55*
Life span < 10 million cycles **
* When non-operating
**Performance may change over time
Ordering information
C rod
F sliding shuttle
P dual link ears
Stroke
KT - - +
BLANK potentiometer
RCE-420 4-20mA output
3. 0V 4. signal 1. supply
outward
Connection
Function
(potentiometer)
Function
(RCE-420)
DIN
(KTC / KTF)
M12
(KTP)
0V
0V 1 3
Signal
signal 2 4
Supply
15-30 V 3 1
Accessories for KTC
KTC-01 Rod end bearing
KTC-02 Link ball