Product Manual

Installation Guide

Operation

4.1 How to use the brakes

The Lifter is equipped with 2 brakes.

1. To engage the brake, press both the brake pedals with your foot.

2. To release the brake, lift up the brake pedals with your foot.

Locks shown on the

Caster Wheels in the

unlock position.

4.2 Loading the roll onto the tray

1. Ensure the load tray is at its lowest position.

2. Make sure the brakes are applied.

3. Lay out the securing straps across the load tray, and extended onto the oor.

4. Position the media over the straps, and up to the edge of the load tray.

5. Move towards the back of the On-A-Roll Lifter®.

6. Take the ends of the

straps and pull them

towards you until the

roll media falls in place on

the load tray. Make sure the

media is properly centered

in the media tray.

7. Secure the straps.