Product Manual

11
Operation
4.3 Lifting the tray
Warning: Do not overload the load tray. The load must be evenly distributed on the
Load Tray surface so that it does not tilt forward or sideways. The parking brakes
should be engaged whenever the On-A-Roll Lifter® is being loaded or unloaded.
1. To raise the load tray, pump the lift pedal
with your foot.
2. Press the lifting pedal several times until
the load tray reaches the desired position.
The load tray can be raised up to 0.85m
(33in) for precise unloading.
4.5 Maneuvering with heavy rolls
1. To adjust the direction of the wheels and ensure smooth rolling action on heavy
loads, exert force on the curved handle and simultaneously lift the unit with the
Push Bar.
4.4 Lowering the tray
Warning: do not put any part of the body under the Load Tray. The parking brakes
should be engaged whenever the On-A-Roll Lifter® is being loaded or unloaded.
1. To lower the load tray, turn the release valve knob counterclockwise slowly.
2. Do not open the release valve too quickly, as this creates a dangerous
work environment.
4.4
4.3