Product Manual
Warnings & Safety Rules
1.1 Warnings
1. Do not put your hands or feet under the load tray.
2. All unconcerned personnel should be more than 60 cm away from the unit
while the rolls are in transit, or being lifted.
3. Do not move the unit while a load is being raised.
4. Do not move the unit without securing the rolls with the straps.
5. Do not move the unit with tray raised more than a couple inches to avoid tip overs
and vision obstruction.
6. Do not operate the lifter if the straps are frayed or damaged.
7. Do not put your foot in front of the swivel wheel; injury could occur when the load
is lowered.
8. Do not operate the machine beyond its rated capacities, or outside of the machines’
normal operation.
9. Do not operate the media lifter on uneven surfaces.
10. Do not lift persons. People could fall and suer severe injury.
1.2 Caution
1. Operators should read and understand the instructions before using the On-A-Roll
Lifter® to avoid injury.
2. The On-A-Roll Lifter® is used to lift or lower rolls of media (e.g. paper rolls) within
specied capacity and should not be used for other functions.
3. Do not operate unless you have been trained or authorized to do so.
4. Do not lower the load at fast speed, as it creates unsafe conditions.
5. Care should be given to the balance and orientation of loads. Unbalanced or
shifting loads can cause danger to the operator or bystanders. If the load becomes
unstable, stop work immediately.
6. The weight of the roll should be distributed evenly on the load tray. The center of
gravity of the goods should be in the center of the load tray width.
7. Do not modify or repair the unit without written consent from the
manufacturer.
8. Remove the loaded goods from the lifter and use safety breaks to prevent the
lifer from moving when servicing it.
9. This lifter is not designed to be water resistant. If not in use, please store in dry
conditions and lower the load tray to the lowest position for stability.
1