Product Manual

Warnings & Safety Rules
1.3 Safety Rules
Failure to obey the instructions and safety rules in this document
may result in serious injury.
1. Do not operate unless you:
a) Understand and practice the principles of safe machine operation specied
in this manual:
- Avoid hazardous situations
- Always perform a pre-operation inspection
- Always perform the function tests (see step 2.1) prior to use
- Inspect the workplace
b) Read, understand and obey:
- Manufacturer’s instructions and safety rules
- Employer´s safety rules and worksite regulations
- Applicable governmental regulations
2. To avoid hazardous situations:
- Do not overload the lifter
- Make sure media roll is balanced on the Load Tray and steady
- The media roll is secured with two straps
- Do not raise the load unless the machine is on a rm, level surface
- Do not move the lifter with the raised load, except for minor positioning
- Do not tilt the lifter back with raised load
- Do not operate the lifter in strong and gusty winds
- Prior to use, inspect the work area for drop-os, holes, bumps, debris,
unstable surfaces or other possible hazardous conditions
- Do not subject the lifter to horizontal force by raising or lowering a xed or
overhanging load
- The lifter can only be used in a lighted environment at least 50LUX
3. Collision Hazards:
- Do not lift the load if not properly centered on the Load Tray
- Check the work area for overhead obstruction or other possible hazards
- Do not stand under or allow personnel under the lifter when the load is
raised
- Do not lower the load unless the area below is clear of personnel and
obstructions
2