Product Manual

Daily Inspection
2.1 What to check before operation
It is the operator’s responsibility to make sure that the On-A-Roll Lifter®
is inspected daily to ensure safe operation:
Check the On-A-Roll Lifter® before operation:
1. Inspect the vertical guide rails, load tray, carriage and hydraulic components for
damage, including bending, cracking and loose or missing hardware. Do not use
the On-A-Roll Lifter® if any faults are discovered during your visual inspection.
2. Inspect the hydraulic system and nearby surfaces for evidence of leaks.
Discontinue use if leaking is evident.
3. Inspect the (4) caster wheels for damage and smooth operation. Wheels should
rotate and swivel smoothly, and should not be cracked, chipped or broken. Do not
use if wheels are damaged or broken.
4. Check the function of the brake. Ensure the parking brakes on the rear casters
are working properly.
5. Ensure all hardware is present and tted correctly. Inspect/tighten any
loose fasteners or hardware.
Caution: Do not use the unit if any malfunction or fault is found.
4