Item Brochure

HSGM HOT
CUT SYSTEM
Toll Free: 800-523-4855
Phone: [phone]
Fax: [phone]
204B Progress Drive,
Montgomeryville, PA 18936
www.go-foster.com
Item # Cut Size Overall Size
61735 ............................................. 36” ...................................................... 46.5”L x 13”W
61737 ............................................. 75” .....................................................85.75”L x 13”W
61739 ............................................115” ..................................................... 125”L x 13”W
Designed specically for fabric graphics cutting and nishing, Foster’s HSGM Hot Cut oers a standard of straight,
square and clean cutting. Your HSGM Hot Cut System includes:
• SabreCutterBarandBase
• HSGMHeatKnifeCarrier
• Siliconetapeforaheatresistantsurface*
What You Can Expect From the Hot Cut:
Accuracy.
Human errors and makeshi straight edges are now a thing of the past. With a single Allen key adjustment, the Heat
KnifeCarrierattachesdirectlytoyourFosterKeencutcutterbar.eHeatKnifecutsapproximately¼inchfromthe
cutter’s aluminum extrusion bar, ensuring precision straight-line fabric cuts in the same location every time.
Speed.
Your shop can accommodate today’s high-demand fabric graphics – and more of them – using the heated blades of
HSGM knives that cut and seal the edges of synthetic fabrics. Eliminate the time associated with cumbersome hand-
cutting and nal trimming of frayed or unraveled edges.
Safety.
eHeatKnifeCarrierissafetouse.Whenthespring-loaded
HeatKnifeisdepressed,acenterposttriggerstheheating
mechanism. As soon as it is released, the heating element
automatically turns o.
*HSGM Heat Knife & tempered glass
sold separately. It is recommended to
use 1/4” tempered glass for a long term
heat resistant surface.  Heat Knives
operate most eciently on tempered
glass surfaces, which do not absorb
heat (unlike wood and metal surfaces),
ensuring maximum blade heat for the
most accurate cuts.
5-year general warranty on all parts (except blades, clamping strips and cutting wheels).
20-year warranty on the bearings used in the cutting head.