Data Sheet
Table Of Contents
- Document Information
- Contents
- 1 Functional description
- 2 Interfaces
- 3 Pin definition
- 4 Electrical specifications
- 4.1 Absolute maximum rating
- 4.2 Operating conditions
- 4.2.1 Operating temperature range
- 4.2.2 Thermal parameters
- 4.2.3 Supply/power pins
- 4.2.4 Current consumption
- 4.2.5 LTE RF characteristics
- 4.2.6 2G RF characteristics
- 4.2.7 ANT_DET pin characteristics
- 4.2.8 PWR_ON pin
- 4.2.9 RESET_N pin
- 4.2.10 SIM pins
- 4.2.11 USB pins
- 4.2.12 Generic Digital Interfaces pins
- 4.2.13 DDC (I2C) pins
- 4.3 Parameters for ATEX applications
- 5 Mechanical specifications
- 6 Qualification and approvals
- 7 Product handling & soldering
- 8 Labeling and ordering information
- Appendix
- A Glossary
- Related documents
- Revision history
- Contact
SARA-R4/N4 series - Data Sheet
UBX-16024152 - R16 Product handling & soldering Page 32 of 39
7.1.2 Tapes
Figure 5 shows the position and the orientation of SARA-R4/N4 series modules as they are delivered
on the tape, while Figure 6 and Table 30 specify the dimensions of the tape.
Pin 1
Sprocket Hole
Feed Direction
Figure 5: Orientation of SARA-R4/N4 series modules on tape
Figure 6: SARA-R4/N4 series modules tape
Parameter
Typical value
Tolerance
Unit
A
0
16.8
0.2
mm
B
0
26.8
0.2
mm
K
0
3.2
0.2
mm
Table 30: SARA-R4/N4 series tape dimensions (mm)
☞ Note 1: 10 sprocket hole pitch cumulative tolerance ± 0.2 mm.
☞ Note 2: pocket position relative to sprocket hole is measured as true position of pocket, not pocket
hole.
☞ Note 3: A
0
and B
0
are calculated on a plane at a distance “R” above the bottom of the pocket.