FUSERS WITH ADJUSTABLE AIR PATTERN CONTROLLERS User Manual

Project

Engineer

Architect

Contractor

Dwg. No.

Date

Location

09/98

KEES INCORPORATED

400 S. Industrial Dr.

z P.O. Box L

Elkhart Lake, WI 53020

Phone: (920) 876-3391

Fax: (920) 876-3065

Website: www.kees.com

INSTALLATION INSTRUCTIONS FOR

"K" SERIES AIR DIFFUSERS

WITH ADJUSTABLE AIR PATTERN CONTROLLERS

1. Set in ceiling grid per ceiling manufacturers recommendations. Support from structure as

necessary.

2. Set pattern controllers to appropriate position.

3. Balance air flow per current catalog performance data using Alnor Velometer Tip #2220,

2220A or #6070 Probe.

ALNOR VELOMETER TIP

2220, 2220A or 6070 PROBE

30°

SUPPLY RETURN

SD-

INSTALL

PAGE 1
INSTALLATION INSTRUCTIONS FOR "K" SERIES AIR DIFFUSERS WITH ADJUSTABLE AIR PATTERN CONTROLLERS 1. Set in ceiling grid per ceiling manufacturers recommendations. Support from structure as necessary. 2. Set pattern controllers to appropriate position. 3. Balance air flow per current catalog performance data using Alnor Velometer Tip #2220, 2220A or #6070 Probe. ALNOR VELOMETER TIP 2220, 2220A or 6070 PROBE OR 30° SUPPLY RETURN Project Location Engineer Architect Contractor Dwg. No.
PAGE 2
POSSIBLE CAUSES OF "DUMPING" WITH THE ADDITION OF THE CENTER TEE EXTENSION BLADES SET FOR 1 WAY THROW. CENTER TEE BY OTHERS TOO SHORT. (SOLUTION - INSTALL CENTER TEE EXTENSION). CENTER TEE BY OTHERS BUT NONE INSTALLED. (SOLUTION - INSTALL CENTER TEE). Project BLADES POSITIONED SO BOTH AIRSTREAMS COLLIDE. (SOLUTION - REPOSITION BLADES TO APPROPRIATE POSITION. SEE FRONT PAGE). OBSTRUCTION BELOW THE BOTTOM OF THE DIFFUSER. (SOLUTION - MOUNT DIFFUSER FLUSH WITH CEILING).