User Manual

Distribution Department: R & D
Department
creation
time:
2022-7-13
Functional test
guidance
creater:
Tom
No：
Functional test guidance
edition:
1.0
Page 1 of 46
4
When the light belt is lit,
the key can regularly
control the closing time of
the light belt
Timing indicator light: can
dynamically indicate the
remaining timing time, such as
1h, 45min left, the 45min
corresponding timing indicator
light, the remaining 30 minutes,
the 30min corresponding
indicator light, and so on, the
light goes out after the time goes
2、sound control
Control the sound for
playback / pause
Two two two individually in
independent mode is affected
by the dial switch.
The control together in
synchronous mode is not
affected by the dial switch
The backlight of the button
turns on the highlight mode
when the stereo plays the
music
Control the synchronization
and independent mode,
Click the key in the
synchronization mode to enter
the separate mode
Click the key in standalone
mode to enter the
synchronization mode
After clicking the sync button,
the synchronization indicator
starts to flash and the system
performs the synchronization
operation state; after the
synchronization, the indicator
becomes on. When the
remote control awakens, the
indicator can indicate the
current state for 1min, and if
the synchronization fails, the
will automatically
extinguished within 1min