Product Diagram

Issue department
：
Bedding Division
Date
：
2017-05-03
Product Function
instruction
Author
：
Ben
No：MC232SC
MC232SC
Version： 1.0
Page 4 of 6
4
1.8. Power
Connect to the 29V DC;
1.9. Pair Function
Power on，the control box enters into mode of code paring；
Press and hold the paring LED of Remote, the backlight of paring LED flashes, the backlight of remote flashes, the
remote enters into mode of code paring;
The backlight of paring LED of remote stops flashing, and the paring led of control box turns off, it indicates that
the code paring is successful;
If fails, repeat all the processes above;
1.10. Test for underbed light
Click button of underbed light, turns on( or turns off ) the underbed light, switch the status once when click once；
This function takes effect only by pressing the corresponding button on the remote.
1.11. FLAT function
Press and release the FLAT button on remote，the head and foot actuators moves to lower position(when the
actuator is free, can turn off the vibration motor and turn off the indicator light when press once )，stop when
press any buton；
This function takes effect only by pressing the corresponding button on the remote.
1.12. ZERO G position function
Press and release ZERO G button on remote，the head and foot actuator moves to preset memory position，stop
when press any button；
This function takes effect only by pressing the corresponding button on the remote.
1.13. Ⅰ position function
Press and release Ⅰ on remote，the head and foot actuator moves to preset memory position,
stop when press any button；