Test Instruction of RF392C 1.
. Test item 2.1 pairing test 1. Double‐click the pairing button on the control box, the pairing indicator lights, and the control box enters pairing mode; 2. Press and hold the pairing button on the remote (the white button under the battery cover on the back) until the pairing indicator on the control box goes off, then the pairing is successful.
2.7 foot up te est Operate the Foott up button on o the remotee control, the e foot actuato or will move o out and stop after releaasing; 2.8 foot dow wn test Operate the Foot down butto on on the reemote contro ol, the foot actuator will m move in and stop after releasing; 2.9 UBB tese e Clickk UBB button , UBB will turn on, click again to turn it i off; 2.
Press and hold zeroG+flat for 5s, the control box will restore memoryIII position to factory setting; 2.17 FLAT test Click FLAT butoon, actuator will move in to lowest position; FCC Warning ： Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
FCC ID: WKZCU358 IC: 20840-CU358 FCC ID: 2AK23RF392AC IC: 22406-RF392AC 5/5
