User manual of RF398A Figure 1 button ofremote 1/5
Item 1.1 ZG button⒔ Click the ZG button, the actuator moves to ZG position, stop when click any button during the movement; Press and hold the ZG button for 5s, timer LED of remote flashes, the control box records current position as ZG position; When in the process of movingto memory positions, the head and foot actuatorsmove first, then the tilt and lumbar actuators move; 1.
1.6 foot down⒐ Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released; When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head andfoot actuators start moving; 1.7 Flat⒔ Click FLAT button, the bed goes flat, stop when click any button during the process of going flat; 1.8 Massage head⒈ Click MASSAGE HEAD button, head massage motor switches massage intensity, massage intensityswitches among 0-1-2-3; 1.
1.12Under bed light⒎ Click the under bed light button, the under bed light switch its on/off state; After the under bed light opens, if do not manually close, it will automatically turn off after 5 minutes; 1.
ISED RSS Warning/ISED RF Exposure Statement ISED RSS Warning: This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence.