User Manual of RF399B
Item 1.1 ZG button⒁ Click the ZG button, the actuator moves to ZG position, stop when click any button during the movement; Press and hold the ZG button for 5s, timer LED of remote flashes, the control box records current position as ZG position; When in the process of movingto memory positions, the head and foot actuatorsmove first, then the tilt and lumbar actuators move; 1.
1.8 Foot up⑻ Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released; 1.9 foot down⑽ Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released； When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head andfoot actuators start moving; 1.10 Flat⑾ Click FLAT button, the bed goes flat, stop when click any button during the process of going flat； 1.
The product is the remote control of the bed, and the matching model is MC120NM. FCC ID:2AK23MC120NM RF Function:2.4G SRD Operating Band/Frequency:2403-2480MHz Antenna Type:PCB antenna Maximum Antenna Gain:1dBi Manufacturer:Keeson Technology Corporation Limited Address:No.
FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
