User manual of RF400A
Item 1.1 ZG button⑶ Click the ZG button, the actuator moves to ZG position, stop when click any button during the movement; Press and hold the ZG button for 5s, timer LED of remote flashes, the control box records current position as ZG position; When in the process of movingto memory positions, the head and foot actuatorsmove first, then the tilt and lumbar actuators move; 1.
1.7 Flat⑼ Click FLAT button, the bed goes flat, stop when click any button during the process of going flat； 1.8 Memory position ⑹ ⑻ Click memory position to move the actuator to the memory position. RF Function:2.4G SRD Operating Band/Frequency:2403-2480MHz Antenna Type:PCB antenna Maximum Antenna Gain:1dBi Manufacturer:Keeson Technology Corporation Limited Address:No.
FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
