User Manual of RF405A Sensor lightt MassageALL U Underbed Light Z ZEROG positio on Foot up Head Up Foot dow wn Head Down n M3|M4 up Lounge possition Antisnore EXTME2 position EX XTME1 positiion M M3|M4 down Flat 1/5
Item 1.1 ZG button6 Click the ZG button, the actuator moves to ZG position, stop when click any button during the movement; Press and hold the ZG button for 5s, timer LED of remote flashes, the control box records current position as ZG position; When in the process of movingto memory positions, the head and foot actuatorsmove first, then the tilt and lumbar actuators move; 1.
1.6 Foot downbutton 8 Press and holdFoot DOWN button of remote,Foot actuator moves in, stop when released； 1.7 Flatbutton 15 Click FLAT button, the bed goes flat, stop when click any button during the process of going flat； 1.8 Massage all 3 Click Massage all button, all massage motor switches massage intensity, massage intensityswitches among 0-1-2-3； 1.9 M3/M4 motor upbutton11 Press and holdM3/M4UP button of remote,M3/M4 actuator moves out, stop when released； 1.
1.12Under bed lightbutton 1 Click the under bed light button, the under bed light switch its on/off state; After the under bed light opens, if do not manually close, it will automatically turn off after 5 minutes; 1.12 Sensor light switch 2 Turn up the switch , open the Sensor function of the bed light , the turn down the switch to close sensor function.
The product is the remote control of the bed, and the matching model is MC120NM. FCC ID:2AK23MC120NM RF Function:2.4G SRD Operating Band/Frequency:2403-2480MHz Antenna Type:PCB antenna Maximum Antenna Gain:1dBi Manufacturer:Keeson Technology Corporation Limited Address:No.
