User Manual of RF502A 1/4
Item 1.1 ZG button⑾ Click the ZG button, the actuator moves to ZG position, stop when click any button during the movement; Press and hold the ZG button for 5s, timer LED of remote flashes, the control box records current position as ZG position; When in the process of movingto memory positions, the head and foot actuatorsmove first, then the tilt and lumbar actuators move; 1.
1.6 foot down⑼ Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released； When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head andfoot actuators start moving; 1.7 Flat⒀ Click FLAT button, the bed goes flat, stop when click any button during the process of going flat； 1.8 Massage head⑴ Click MASSAGE HEAD button, head massage motor switches massage intensity, massage intensityswitches among 0-1-2-3； 1.
FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
