User Manual

37
Table of ContentsSetting UpWi-Fi StreamingUsing KEF Connect AppFAQ and Troubleshooting
9. Playback with Bluetooth
You can pair your Bluetooth devices (e.g. computers) with the speakers through
Bluetooth connection. The speakers must always be first connected to your local
network before Bluetooth connection.
9.1 Selecting Bluetooth Mode
•In the KEF Connect App, tap the Bluetooth button (
) to switch to Bluetooth mode.
•Alternatively, press the source button on the top panel of the Primary Speaker;
•Or, press the source button on the remote control.
You can assign the Bluetooth mode as a second wake-up source to turn
on the speakers automatically when there is audio input through Bluetooth
connection. See chapter “Power Saver – Second Wake-Up Source”.
9.2 Bluetooth Pairing
1. In Bluetooth mode, check the Bluetooth icon on the top panel of the Primary
Speaker. When the Bluetooth icon pulses slowly, the speakers are in the discovery
mode and ready to pair with a Bluetooth device.
If the Bluetooth icon is constantly lit, the speakers are already paired with a Bluetooth
device. To disconnect the connected Bluetooth device, short press the Bluetooth
pairing button (B) on the back panel of the Primary Speaker. The Bluetooth icon
blinks slowly when it is ready to pair with a new Bluetooth device.