Speaker Stands Assembly Note: Important When mass loading columns use a funnel to apply 'Inert Filler' Always load columns with top plate attached i.e. upside down to prevent damage to base plate. Do not tighten fixing screws fully until top and base plates are all in position. E w A G A ·. fr :.t i c 8 I i ll + 0 ~ Key · A 2- Top Plates B 2 - Base Plates C 2 - Centre Columns D 8 - Satellite Columns E 2 - M8 Top Fixing Screws · .
KEF Bumper Pad Placement Guide for LSSO WIRELESS Speaker GFS-524 Black I White I Titanium Thank you for purchasing the GFS-524 stand designed for LS50 Speakers. If you have purchased LSSO Wireless to use with this stand, the following information will show you how to place the rubber feet/bumper pads appropriately for use with the GFS-524. [For LS50 passive speakers, the GFS-524 will work just fine as-is.] LS50 Wireless come preinstalled with the feet/bumper pads. Step 1. Assemble the GFS-524 Stands.
Step 4. Locate the four corner bolts on the top of the stand. Step 5. Place the bumpers with the adhesive side down on the four bolts.
Step 6. You can now place your LSSO Wireless Speakers on to the stands To use the LSSO Stands with other speakers, you may use the supplied CLEAR bumpers. Apply them adhesive side down in the following manner.
Performance Speaker Stand Designed and Engineered in the UK Speaker positioning is critical when it comes to creating the ideal soundscape. KEF Performance Speaker Stands were engineered in the UK specifically to ensure bookshelf speakers sound at their best. This encompasses ideal driver height positioning, steel damping plates accompanied by aluminium tube and base plates, and space available for the addition of inert filler for further stability.
