Owner's Manual
Table Of Contents
- User Manual
- Table of Contents
- Introduction
- General Information
- Unpacking
- In the Box
- Floor Spikes (optional)
- Setting Up LS60 Wireless
- Connection and Control Interface
- Wi-Fi Streaming
- Multi-Room Streaming
- Voice Control Over Mobile Device
- Playback with Bluetooth
- Playback with HDMI eARC input
- Playback with Optical Input
- Playback with Coaxial Input
- Playback with Auxiliary Input
- Using KEF Connect App
- Cleaning and Maintenance
- Disposal
- FAQ and Troubleshooting
- Appendix
- Quick Start Guide
95
Table of ContentsSetting UpWi-Fi StreamingUsing KEF Connect AppFAQ and Troubleshooting
Speaker Pattern Status
Primary
and
Secondary
Blinking white, blue,
light blue, magenta,
lavender and yellow
alternately
The firmware is being updated. Do not unplug
the power cables until the firmware update is
completed. If you encounter any issues during
the firmware update, do not interrupt the
process and contact your local representative or
contact your local KEF dealer.
Primary
and
Secondary
Blinking red slowly
The firmware update process failed.
1. Unplug the power cables from both speakers.
2. Wait approximately 60 seconds.
3. Plug the power cables back to both speakers.
4. Performthermwareupdateagainonthe
KEF Connect App.
If the problem persists, please send a log from
the KEF Connect App (Settings > Support >
Report issue).
Primary
Blinking red and light
blue slowly
The Secondary Speaker is missing during
firmware update.
*The LED indicator light illuminates briefly and fades out when there are no active
interactions with the speakers (e.g. controlling playback or volume).