LS60 Wireless FAQ and Troubleshooting User Manual Using KEF Connect App Wi-Fi Streaming Setting Up Table of Contents
Table of Contents 1. Introduction................................................................................................................................5 2. General Information..................................................................................................................6 2.1 2.2 3. 4. 5. 6. Reading and Storing the User Manual..............................................................................................................6 Signal Symbol/Word Definitions............
10. Voice Control Over Mobile Device................................................................................... 38 10.1 Siri.........................................................................................................................................................................................38 10.2 Google Assistant.........................................................................................................................................................38 11.
16.4.4 Renaming a Sound Profile............................................................................................................................68 16.4.5 Deleting a Sound Profile...............................................................................................................................69 16.5 Profile.................................................................................................................................................................................
Thank you for choosing KEF wireless speaker system – LS60 Wireless. Innovation is what sets KEF apart from its competitors. For the last 60 years, KEF has been at the forefront of loudspeaker research and development, designing class-leading speakers that have dealt with the challenges of reproducing the latest musical formats, and reproducing them to the highest possible quality. This legacy continues today with the LS60 Wireless, our powerful wireless HiFi speaker system for the digital music era.
General Information 2.1 Reading and Storing the User Manual This user manual accompanies the LS60 Wireless speaker system (hereafter referred to as the “speakers”), and contains important information on setup and handling. Table of Contents 2. Retain the user manual and safety information for further use. Make sure to include the user manual and safety information when passing the speakers on to third parties. 2.
Unpacking Setting Up Follow the instructions below to unpack the speakers. Table of Contents 3. 1. Detach all locking devices from the box. 2. Remove the top box cover and protective inlay. 4. Open the outer box and remove it. 5. Open the bottom box cover and slide out the speaker with the protective inlays. 6. Slightly tilt the speaker to the left and remove the right protective inlay. Wi-Fi Streaming 3. Remove the corner reinforcers. 7.
In the Box Table of Contents 4. Setting Up ×1 set ×1 ×1 ×2 ×8 ×1 ×3 2. Check to make sure that all parts are included, namely: • Speaker ×2 (Primary Speaker ×1, Secondary Speaker ×1) • Remote control ×1 (with 2 AAA batteries) • Inter-speaker cable ×1 (length: 8 m) Wi-Fi Streaming 1. Take the speakers and accessories out of the packaging. • Spikes ×8 • Spanner ×1 • Printed materials: Quick Start Guide, Safety Information and Warranty Information FAQ and Troubleshooting 3.
Floor spikes (optional) The speakers are pre-installed with flat feet. For critical listeners, the flat feet can be replaced with the provided sharp spikes to isolate vibrations. To replace the floor spikes: Setting Up 1. Place the speakers horizontally with the help of the packaging materials. Table of Contents 5. FAQ and Troubleshooting 3. Attach the spikes to the bottom of the speakers. Rotate the spikes clockwise with the spanner until they are secure. Using KEF Connect App Wi-Fi Streaming 2.
Setting Up LS60 Wireless 6.1 Selecting an Appropriate Router The speakers must be “onboarded” to your Wi-Fi network (see chapter “Onboarding”) for the best sound quality, wireless streaming and comprehensive control. Table of Contents 6. Technical Requirements of your Router • A 5 GHz Wi-Fi network is recommended for stable streaming, especially for hi-resolution music.
Connecting to Power 1. Connect the power cables into the AC input connectors (A) on the back panels of the Primary and Secondary Speakers. Table of Contents 6.2 FAQ and Troubleshooting Using KEF Connect App Wi-Fi Streaming After successful power connections, the LED indicator light of the Primary Speaker will blink white and amber. The speakers are now ready to be “onboarded” to your personal Wi-Fi network through the KEF Connect App (see chapter “Onboarding”). Setting Up 2.
6.3.1 Installing the KEF Connect App Install the KEF Connect App on your mobile device to get the speakers “onboarded” to your Wi-Fi network. 1. Search “KEF Connect” in the App Store or Google Play Store to download and install the KEF Connect App on your iOS* or Android** device. FAQ and Troubleshooting *Requires iOS 14 or above. Refer to App Store for the latest requirements. **Requires Android 8 or above. Refer to Google Play for the latest requirements. Using KEF Connect App Wi-Fi Streaming 2.
Using iOS Devices 1. Make sure your mobile device is connected to the network you want to onboard your speaker to. 2. Launch and login to the KEF Connect App on your mobile device. 3. Select “LS60 Wireless” under “Speakers nearby”. The speakers with the warning sign ( ) are not set up yet. Select the speakers with this warning mark to get them “onboarded”. Table of Contents 6.3.2 4. Select your local Wi-Fi network. Press “Next” to begin the onboarding process.
1. Make sure your mobile device is connected to your local Wi-Fi network. 2. Launch and login to the KEF Connect App on your mobile device. 3. Allow the app to access your device’s location when requested. 4. Select “LS60 Wireless” under “Speakers nearby”. The speakers with the warning sign ( The speakers with the check mark ( Table of Contents Using Android Devices with Google Play Service ) are not set up yet. ) are ready for use. 5. Tap “Open Google Home” to proceed.
• After successful connection, you may be prompted if there is a new firmware update available. Follow the instructions in the KEF Connect App to complete the update process. FAQ and Troubleshooting Using KEF Connect App Wi-Fi Streaming • The latest operations of the Google Home App may differ from the above. Setting Up • The LED indicator light of the Primary Speaker illuminates white briefly and then fades out when the speakers are successfully connected. Table of Contents 9.
Using Android Devices without Google Play Service 1. Make sure your mobile device is connected to your local Wi-Fi network. 2. Launch and login to the KEF Connect App on your mobile device. 3. Allow the app to access your device’s location when requested. 4. Tap “Choose a Wi-Fi network”. Table of Contents 6.3.4 5. Select your local Wi-Fi network and then tap “OK”. 7. If preferred, create a new name for the speakers and then tap “Next”. This name will be used for Wi-Fi and Bluetooth connections. 8.
Table of Contents FAQ and Troubleshooting Using KEF Connect App Wi-Fi Streaming • After successful connection, you may be prompted if there is a new firmware update available. Follow the instructions in the KEF Connect App to complete the update process. Setting Up • The LED indicator light of the Primary Speaker illuminates white briefly and then fades out when the speakers are successfully connected.
• The two speakers are distinguished between the Primary Speaker and the Secondary Speaker. By default, the Primary Speaker is the right channel* and should be placed on your right hand side as you face the speakers. For the best stereo experience, soundstage and stable connection, place the speakers at least 1 meter apart. *The left and right channels can be swapped through the KEF Connect App. See chapter “Speaker System Options – Inverse L/R Speaker”.
Wireless Mode Wired Mode Up to 8 meters. Note that RF interference, including Wi-Fi, Bluetooth, microwaves and IoT devices, may reduce this distance. Use the provided inter-speaker cable or connect with a shielded Cat-6 Ethernet cable. The cable length should be within 10 meters. • You can also modify the settings in the KEF Connect App to best fit your listening environment. 6.
Connection and Control Interface 7.1 Front Panel Table of Contents 7. Primary Speaker Setting Up Secondary Speaker • The IR (infrared) receiver for the remote control can be found on the Primary Speaker where the KEF logo is located. The LED indicator light of the Secondary Speaker only comes on when: • The Secondary Speaker is initially connected to power and is working properly. The LED indicator light will briefly come on orange and then go out.
Back Panel P P/S pairing button B Bluetooth pairing button V TV port Resets the speakers to the factory defaults (including network settings and all EQ and system preferences). Press and hold the button until the indicator light above the button blinks. Re-establishes the connection between the Primary Speaker and the Secondary Speaker if the connection is lost. Enables Bluetooth pairing. The speakers will be ready to pair with a new device. Any Bluetooth connected device will be disconnected.
Connection port for service. S Subwoofer output jack Connects a subwoofer to the speakers through an RCA cable. T Primary/Secondary connection port Connects the Primary Speaker and Secondary Speaker with the inter-speaker cable. N Network port Connects the speakers to a router with a LAN cable. This port is colour-coded yellow. Connects the speakers to the power source with the power cables.
LED Indications Setting Up The connection and operation status can be easily checked through the colours and patterns of the LED indicator on the Primary Speaker. Table of Contents 7.3 Solid white* The speakers are operating in Wi-Fi Mode. Solid green* The speakers are operating in Spotify Connect Mode. Solid blue* The speakers are operating in Bluetooth Mode and a device is already paired with the speakers. Solid light blue* The speakers are operating in TV Mode.
On/off button Mute button Volume up button Previous source button Table of Contents Remote Control Volume down button Play/pause button Next button • Insert two AAA batteries into the battery compartment before use. To do so, slide open the battery compartment cover on the back and insert the batteries into the compartment according to the polarity (+/–). Close the battery compartment cover when done. • Point the remote control to the IR receiver located on the front panel of the Primary Speaker.
KEF Connect App The KEF Connect App allows you to set up the speakers, apply sound settings, turn on/ off the speakers, switch sound sources, and access and play back your streaming music and music stored in media server. Table of Contents 7.
Wi-Fi Streaming 8.1 Wireless Streaming Protocols To stream audio to the speakers, your mobile device must be connected to the same Wi-Fi network as the speakers. The speakers can be turned on from standby mode through all wireless streaming protocols. 8.1.1 Table of Contents 8. AirPlay 2 Setting Up AirPlay 2 lets you share audio output from Apple devices to the speakers. 1. Start music or video playback on your iOS device.
Chromecast If your device is Chromecast-enabled, you can stream audio output from the device to the speakers. Table of Contents 8.1.2 1. Start music or video playback on your Chromecast-enabled device. 2. In the Google Home App, tap “LS60 Wireless” (or the name you have created for the speakers). • The availability for streaming depends on the app compatibility. • The latest operations of the Google Home App may differ from the above. Using KEF Connect App Wi-Fi Streaming Setting Up Cast my audio”.
ROON Ready Roon is a high quality music management system that pulls together music from a NAS drive, locally stored music (i.e. on your computer), compatible streaming services and Dropbox to create a searchable, surfable magazine about your music. The speakers are certified “Roon Ready”. For more information on Roon, visit roonlabs.com. Table of Contents 8.1.3 Setting Up 1. Enable the speakers in the Audio menu. FAQ and Troubleshooting 3.
Music Streaming Apps Native Protocols 8.1.4.1 Spotify Connect Table of Contents 8.1.4 Spotify is a digital music and podcast streaming service that gives you access to millions of songs and other content from artists all over the world. The speakers are ready for Spotify Connect. 2. Tap the device icon ( ) at the bottom of the playback screen. 3. Select “LS60 Wireless” (or the name you have created for the speakers) from the selection menu to start streaming. Setting Up 1.
QPlay QQ Music is one of China’s most popular online music streaming services. QPlay lets you stream music directly from the QQ Music App. The speakers are ready for the QPlay feature. Table of Contents 8.1.4.2 1. To stream music, launch the QQ Music App and enable QPlay in the settings. ) on the playback screen. FAQ and Troubleshooting Using KEF Connect App 4. Select “KEF LS60 Wireless” (or the name you have created for the speakers) from the device list to start streaming. Wi-Fi Streaming 3.
TIDAL Connect connect TIDAL is a subscription-based music, podcast and video streaming service that combines lossless audio and high-definition music videos with exclusive content and special features on music. The speakers are ready for the TIDAL Connect feature for music streaming. Table of Contents 8.1.4.3 2. Select “LS60 WireIess” (or the name you have created for the speakers) from the list of nearby devices to pair with the Tidal Connect App to start streaming.
Amazon Music Amazon Music is a music streaming platform and online music store operated by Amazon. You can access your Amazon Music account through the KEF Connect App to stream music to the speakers. High-res audio is supported with Amazon Music Unlimited subscription. Deezer Deezer is an online music streaming service. It allows users to listen to music content from a wide range of record labels on various devices online or offline.
TIDAL is a subscription-based music, podcast and video streaming service that combines lossless audio and high-definition music videos with exclusive content and special features on music. You can access your TIDAL account through the KEF Connect App to play hi-resolution audio. A valid Hi-Fi tier subscription is required. 8.1.5.6 Internet Radio The KEF Connect App offers access to thousands of Internet radio stations from all over the world, offering music, news and discussion. 8.1.5.
Wireless streaming protocol Spotify – Spotify Connect – TIDAL Connect TIDAL QQ Music – Apple Music – – Amazon Music – – Deezer – – Qobuz QPlay – – – Internet radio – – Audio podcast – – Youtube (audio) – – – – – – Youtube Music * Bluetooth Wi-Fi Streaming App AirPlay 2 Chromecast ROON Music KEF Ready streaming Connect app native App protocol Setting Up Recommendations for the best wireless streaming options with regard to music/media apps on your mobile devices.
Multi-Room Streaming 9.1 AirPlay 2 Setting Up Apple Airplay 2 can extend the speakers to become part of a multi-room wireless music system which can be controlled with iOS devices. If you have more than one pair of AirPlay 2 speakers connected to the same network, select the pairs for playback of the same audio output at the same time. Table of Contents 9. You can control the volume of the speakers individually or together as a group. 9.
Table of Contents 4. Tap each device (including the sets of speakers) you want to add to the group. A check mark will appear next to each device you have selected. 5. Tap “Next” Wi-Fi Streaming Setting Up 6. Enter a name for your group. FAQ and Troubleshooting Using KEF Connect App 7. Tap “Save”.
ROON With Roon Ready certification, the speakers are compatible with Roon’s multi-room streaming functionality. Roon supports “Zone Grouping”, or synchronizing audio playback in several zones within your house. Note that “Zones” can only be grouped with other zones of the same type (e.g. RAAT, AirPlay etc.). Table of Contents 9.3 1. To group zones, select the zone you are controlling in desktop and tablet interface, by clicking the “Zone Picker” in the footer, next to volume. 2. Tap “Group Zones”.
Voice Control Over Mobile Device 10.1 Siri You can use Siri to control playback (e.g. skipping tracks, controlling the volume level) while your iOS mobile device is streaming music to the speakers. Table of Contents 10. Setting Up Hey Siri. Play some music on the LS60 Wirelss. 10.2 Google Assistant Wi-Fi Streaming You can use Google Assistant to control playback (e.g. skipping tracks, controlling the volume level) while your Android mobile device is streaming music to the speakers.
Playback with Bluetooth You can pair your Bluetooth devices (e.g. computers) with the speakers through Bluetooth connection. The speakers must always be first connected to your local network before Bluetooth connection. 11.1 Selecting Bluetooth Mode Table of Contents 11. Setting Up • In the KEF Connect App, tap the Bluetooth button ( ) to switch to Bluetooth mode. Bluetooth Pairing 1. In Bluetooth mode, check the LED indicator light of the Primary Speaker.
Table of Contents Alternatively, press the Bluetooth pairing icon located at the upper right corner of the remote control in the KEF Connect App to disconnect the paired device. When Bluetooth pairing is done, the Bluetooth icon will stay lit. The speakers remember your last paired Bluetooth device. Once Bluetooth mode is selected, the speakers will automatically connect with your last paired device if it is around. In the KEF Connect App, use the control elements below for playback controls.
The speakers are compatible with HDMI eARC (enhanced Audio Return Channel) output from your TV for integrated control through a single HDMI cable. The speakers must always be first connected to your local network before HDMI connection. The speakers are also backward compatible with ARC and HDMI CEC. HDMI CEC allows the use of the television remote control to adjust the volume of the speakers.
Selecting TV Mode • In the KEF Connect App, tap the TV Mode button (TV) to switch to TV Mode. Table of Contents 12.2 You can assign TV mode as a second wake-up source to turn on the speakers automatically when there is audio input through the HDMI connection. See chapter “Power Saver – Second Wake-Up Source”. 12.3 Playback Controls FAQ and Troubleshooting All playback controls (except adjusting volume) must be done on the connected device. The volume can also be adjusted on the remote control.
Playback with Optical Input You can connect your devices with optical output (e.g. TV and game consoles) to the speakers through an optical cable. The speakers must always be first connected to your local network before optical connection. 13.1 Optical Cable Connection Table of Contents 13. Wi-Fi Streaming Setting Up Connect the optical output jack of your device and the optical input jack (O) on the back panel of the Primary Speaker via an optical cable.
• The LED indicator light of the Primary Speaker illuminates magenta briefly and then fades out when Optical mode is selected. You can assign Optical mode as a second wake-up source to turn on the speakers automatically when there is audio input through the optical connection. See chapter “Power Saver – Second Wake-Up Source”. 13.3 Setting Up • Alternatively, press the source button on the remote control.
Playback with Coaxial Input You can connect your devices with coaxial output (e.g. DVD/CD player) to the speakers through a coaxial cable. The speakers must always be first connected to your local network before coaxial connection. 14.1 Coaxial Cable Connection Table of Contents 14. FAQ and Troubleshooting Using KEF Connect App Wi-Fi Streaming Setting Up Connect the coaxial output jack of your device and the coaxial input jack (C) on the back panel of the Primary Speaker via a coaxial cable.
Selecting Coaxial Mode • In the KEF Connect App, tap the CX button (COAX) to switch to Coaxial mode. Table of Contents 14.2 14.3 Playback Controls FAQ and Troubleshooting All playback controls (except adjusting volume) must be done on the connected device. The volume can also be adjusted on the remote control. Wi-Fi Streaming You can assign Coaxial mode as a second wake-up source to turn on the speakers automatically when there is audio input through the Coaxial connection.
Playback with Auxiliary Input You can connect your devices with an RCA output (e.g. turntables, computers, TV) to the speakers through an RCA cable. The speakers must always be first connected to your local network before auxiliary connection. 15.1 Auxiliary Cable Connection Table of Contents 15.
• The LED indicator light of the Primary Speaker illuminates yellow briefly and then fades out when AUX mode is selected. You can assign Auxiliary mode as a second wake-up source to turn on the speakers automatically when there is audio input through the auxiliary connection. See chapter “Power Saver – Second Wake-Up Source”. 15.3 Setting Up • Alternatively, press the source button on the remote control.
The KEF Connect App allows you to set up the speakers, apply EQ settings, turn on/ off the speakers, switch sound sources and access and play back your music streaming services. 16.1 Home 16.1.1 Overview Latest news and stories from KEF Table of Contents Using KEF Connect App Setting Up 16.
Editing the Home Screen You may edit the Home screen to show or hide tiles (e.g. Music in the Cloud) or buttons that are of frequent or less frequent use. 1. Tap the edit icon ( ) at the top right of the app. Setting Up 2. Tap the “+” or “–” symbols or drag and drop to show or hide a tile. Table of Contents 16.1.2 3. Tap the edit icon ( ) at the top right of a tile.
Music Content FAQ and Troubleshooting Using KEF Connect App Wi-Fi Streaming Setting Up The KEF Connect App allows you to access and play back music from your music streaming services as well as Internet radio stations and podcasts. Table of Contents 16.
16.3.1.1 Amazon Music Setting Up 1. To stream music, tap “Amazon Music” under “Music in the Cloud” in the KEF Connect App. Table of Contents Playing Music from Music Streaming Services 2. Login to your Amazon Music account. FAQ and Troubleshooting Using KEF Connect App 3. Browse and play music to start streaming. Wi-Fi Streaming 16.3.
1. To stream music, tap “Deezer” under “Music in the Cloud” in the KEF Connect App. Table of Contents 16.3.1.2 Deezer FAQ and Troubleshooting Using KEF Connect App 3. Browse and play music to start streaming. Wi-Fi Streaming Setting Up 2. Login to your Deezer account.
1. To stream music, tap “Qobuz” under “Music in the Cloud” in the KEF Connect App. Table of Contents 16.3.1.3 Qobuz FAQ and Troubleshooting Using KEF Connect App 3. Browse and play music to start streaming. Wi-Fi Streaming Setting Up 2. Login to your Qobuz account.
Through the KEF Connect App, you can be prompted to the Spotify App on your device to stream music to the speakers. See chapter “Spotify Connect”. Table of Contents 16.3.1.4 Spotify 1. To stream music, tap “TIDAL” under “Music in the Cloud” in the KEF Connect App. Setting Up 16.3.1.5 TIDAL FAQ and Troubleshooting 3. Browse and play music to start streaming. Using KEF Connect App Wi-Fi Streaming 2. Login to your TIDAL account.
1. To access Internet radio, tap “Radio stations” under “Live Stream” in the KEF Connect App. 16.3.1.7 Podcast 1. To access podcast contents, tap “Podcasts” under “Live Stream” in the KEF Connect App. Wi-Fi Streaming Setting Up 2. Browse and play a radio station to start streaming. Table of Contents 16.3.1.6 Internet Radio FAQ and Troubleshooting Using KEF Connect App 2. Browse and play a podcast to start streaming.
Playback Controls The below features are available to control playback or behaviour. Please note that these features may not be available to all music sources and there may be slight differences in the control interface. 16.3.2.1 Playback Screen Hide playback screen Table of Contents 16.3.2 Setting Up Queue Previous/next Repeat Play/pause Shuffle Volume control 16.3.2.
) to select or deselect an item Alternatively, tap the option icon (…) next to an item (e.g. track, album, playlist), or press and hold on an item and then select “Add to Favourites” or “Remove from Favourites”. • Accessing your favourites FAQ and Troubleshooting Using KEF Connect App To show the favourites in your current music source, tap “Favourites” in the main menu. Setting Up In the playback screen, tap the favourite icon ( (music, podcast, radio station) as favourites.
2. Select “Add to Queue” to add the track to the end of the Queue. Or select “Play next” to add the track as the next song. Depending on your selections, you can also add all tracks from an artist, all tracks from an album, or all tracks from a playlist to the queue. • Showing the Current Queue ) at the top right. FAQ and Troubleshooting From the playback screen, tap the queue icon ( Setting Up 1. From the playback screen, tap the option icon (…).
2. To remove a track from the queue, tap the edit icon ( ) at the top right. ) to remove it FAQ and Troubleshooting Using KEF Connect App Wi-Fi Streaming 3. Select the track in the queue and then tap the trash bin icon ( from the queue. You may also select multiple tracks for removal. Setting Up 1. To edit the playback sequence, press and hold the three bars ( ) on the right hand side of a track and then drag the track up or down the queue.
A playlist is a list of tracks that can be played back in the preferred sequential order. Playlists can be saved for future listening. • Accessing the Playlists In the current music source, tap “Playlists” in the main menu. Table of Contents 16.3.2.5 Playlists 1. In the current music source, tap “Playlists” in the main menu. 2. Tap “Create new playlist”. Setting Up • Creating a Playlist Wi-Fi Streaming 3. Create a name for the playlist and then tap “Create”. • Adding Tracks to a Playlist 2.
1. In the playback screen of the track to be removed, tap the option icon (…). Table of Contents • Editing a Playlist Setting Up 2. Tap “Remove from playlist”. • Deleting a Playlist Wi-Fi Streaming 1. In the playlist, tap the option icon ( ) at the top right corner. FAQ and Troubleshooting Using KEF Connect App 2. Tap “Delete playlist”.
Equalisations For the best audio performance, apply sound settings according to your listening area. 16.4.1 Normal Mode 1. In the KEF Connect App, tap the EQ settings icon ( screen. ) at the bottom of the Home Table of Contents 16.4 Setting Up 2. Tap “Add new profile” Wi-Fi Streaming 3. Select “Normal mode”. FAQ and Troubleshooting 5. Configure the settings according to your listening area. Using KEF Connect App 4. Create a name for your new profile and then tap “Save”.
• Distance from the front edge of the table (on a desk only) (> 50 cm to 0 cm) Table of Contents • Installation location: On a stand or on a desk Damped: Large furniture, thick carpet and heavy curtains FAQ and Troubleshooting Moderate: Medium furniture, thinner carpet or rug, some curtains and features on walls Using KEF Connect App • How is your room? (Damped / Moderate / Lively) Wi-Fi Streaming Setting Up • Distance to the wall (< 10 cm to > 50 cm) 64
Table of Contents Lively: Hard floor, less furniture, large windows and no curtains • How large is the room? (< 20 m2 / 20–40 m2 / > 40 m2) • Subwoofer is plugged in (No / Yes). If a subwoofer is plugged in, set up the model, balance and volume of the subwoofer. Setting Up • Balance Control (L–C–R) 6. Tap “Save” when the settings are done. Expert Mode ) at the bottom of the Home Using KEF Connect App 2. Tap “Add new profile”. Wi-Fi Streaming 1.
Wi-Fi Streaming Setting Up Table of Contents 5. The Expert Mode lets you configure the EQ preferences in greater precision. The settings include: • Desk Mode (On/Off, -10.0 dB to 0.
Distance to the wall (Expert Mode: Wall Mode): This setting adjusts all frequencies from around 500 Hz downwards, causing broader changes than Desk Mode. A dip in these frequencies causes a tinny sound, while too much of these frequencies can overwhelm the overall presentation with lower frequencies. How is your room? (Expert Mode: Treble Trim): This adjusts the frequencies above 500 Hz.
Selecting a Sound Profile 1. In the KEF Connect App, tap the EQ settings icon ( screen. ) at the bottom of the Home Setting Up 2. Tap “Default” and then select a sound profile to apply to the speakers. The profiles with a star icon are created in Expert mode. Table of Contents 16.4.3 16.4.4 Renaming a Sound Profile 2. Tap “Rename profile”. FAQ and Troubleshooting 3. Create a new name for your profile and then tap “Save”. Using KEF Connect App Wi-Fi Streaming 1.
Deleting a Sound Profile 1. In the selected EQ profile, tap the option icon ( ) at the top right. Table of Contents 16.4.5 FAQ and Troubleshooting Using KEF Connect App Wi-Fi Streaming Setting Up 2. Tap “Delete profile”.
This menu allows you to edit your personal details (account name and profile picture) of your registered user account. 1. In the KEF Connect App, tap the Setting icon ( screen. ) at the bottom of the Home 2. Tap “View profile”. Using KEF Connect App Wi-Fi Streaming ) at the top right and start editing. FAQ and Troubleshooting 3. Tap the edit icon ( Table of Contents Profile Setting Up 16.
Choosing Your Speaker 16.6.1 My Speaker and Speakers Nearby This menu allows the KEF Connect App to switch to another pair of speakers for control and streaming. All speakers must first be set up through the same KEF Connect App before they are available for selection. 1. In the KEF Connect App, tap the Setting icon ( screen. Table of Contents 16.6 ) at the bottom of the Home Setting Up 2. Tap the name of the connected speakers.
Speaker Info This menu allows you to find out more information about the connected speakers, rename the speakers and disconnect the speakers from the KEF Connect App. 1. In the KEF Connect App, tap the Setting icon ( screen. ) at the bottom of the Home Setting Up 2. Tap the name of the connected speakers. Table of Contents 16.6.2 ) next to the name of the speakers. FAQ and Troubleshooting Using KEF Connect App 4. Check the MAC address, IP address and firmware version of the speakers.
) at the bottom of the Home 2. Tap “Speaker preferences”. 16.7.1 Power Saver – Standby Mode This setting determines how long (ECO (20), 30 or 60 mins) the speakers will remain idle before automatically entering Standby Mode. If “never” is selected, the speakers must be manually turned off. 16.7.2 Power Saver – Second Wake-Up Source This setting enables a second source to automatically turn on the speakers when there is audio input from the selected source.
This setting enables the start up tone to be muted when the speakers are turned on. 16.7.5 Speaker System Options – Cable Mode You can connect the Primary Speaker and Secondary Speaker with the provided interspeaker cable through the “T” connection ports on the back panels of the speakers. Once the cable is connected, enable this setting to enable Cable mode and disable the wireless connection. Table of Contents Do Not Disturb – Start Up tone Setting Up 16.7.
This menu allows you to configure volume settings. To access this menu: 1. In the KEF Connect App, tap the Setting icon ( screen. ) at the bottom of the Home 2. Tap “Volume”. 16.8.1 Table of Contents Volume Volume Display Setting This setting allows you to configure how the volume control should be displayed. Setting Up 16.8 Tap the speaker icon on the left to mute or restore audio output from the speakers. • –/+: The volume control will be displayed as “–” and “+” buttons for adjustment.
This setting is only available on iOS devices. The hardware volume buttons refer to the physical volume buttons on your device. Disable this setting when you are experiencing conflicts with other music streaming apps over Wi-Fi connection. Speaker Volume Sensitivity This setting allows you to configure the number of volume steps for each single press of the physical volume buttons of your device. 16.8.
) at the bottom of the Home 2. Tap “Performance”. Streaming Settings – Audio Quality This setting allows you to select the audio quality for music streaming services inside the KEF Connect app. • Hi-Fi (Hi-Fi quality): Always select this setting for the best audio quality. The highest quality depends on the music streaming service and your subscription. • High (CD quality): Select this setting when the speakers are in a crowded network and experiencing quality drop-outs.
Table of Contents • Test history: Select this option to review the test history. FAQ and Troubleshooting Using KEF Connect App Wi-Fi Streaming Setting Up • Learn to improve your connection: Select this option to access the KEF website for tips on assessing and improving your network quality.
After you have successfully set up the speakers with the KEF Connect App, you may be required to update the firmware if a new version is available. Follow the instructions in the KEF Connect App to complete the update process. 16.10.2 Automatic Firmware Check Setting Up 16.10.1 Automatic Firmware Update after Onboarding Table of Contents 16.10 Firmware Upgrade The speakers check the server every 4 hours if a new firmware update is available.
This menu allows you to manually check for firmware updates. To access this menu: 1. In the KEF Connect App, tap the Setting icon ( screen. ) at the bottom of the Home Table of Contents 16.10.3 Manual Firmware Update FAQ and Troubleshooting Using KEF Connect App Wi-Fi Streaming 3. If an update is available, tap “Update now” to proceed with the firmware update. Setting Up 2. Tap “Speaker update”.
This menu allows you to reset the home screen and send analytics. To access this menu: 1. In the KEF Connect App, tap the Setting icon ( screen. ) at the bottom of the Home Table of Contents 16.11 Application 16.11.1 Theme Settings – Theme This setting allows you to set a theme mode (System, Light or Dark). Setting Up 2. Tap “Application”. 16.11.2 Theme Settings – Reset Home Screen 16.11.
This menu allows you to report issues, give suggestions and make general enquiries. To access this menu: 1. In the KEF Connect App, tap the Setting icon ( screen. ) at the bottom of the Home Table of Contents 16.12 Support FAQ and Troubleshooting Using KEF Connect App 4. When reporting an issue, your email program will automatically attach the speaker logs that helps KEF investigate the issue. Please add a description of the problem in the email message as well. Wi-Fi Streaming 3.
Cleaning and Maintenance WARNING! Risk of electric shock! Improper cleaning of the speakers may result in injury. • Always unplug the power cables from the power sockets/outlets before cleaning the speakers. Table of Contents 17. Risk of short circuit! Water and other liquids that have penetrated the housing may cause a short circuit. • Make sure that no water or other liquids penetrate the housing of the speakers. Setting Up NOTICE! • Never immerse the speakers in water or other liquids.
Disposal 18.1 Disposing of the Packaging Sort the packaging before you dispose of it. Dispose of paperboard, cardboard and wrappings in accordance with your local guidelines. 18.2 Table of Contents 18. Disposing of the Speakers LS60 Wireless is an electronic product and may not be able to be disposed of as household waste. Please dispose of your speaker in accordance with the regulations in force in your city or county.
FAQ and Troubleshooting 19.1 Set-up 1. How do I set up the speakers? • First of all, a home Wi-Fi network is required. This is to ensure you can enjoy the full range of features and keep the system up to date. Table of Contents 19. • Office, hotel, guest and public networks often feature additional security or authentication methods which may prevent the speakers from connecting.
• By default, the Primary Speaker is the right channel and the Secondary speaker is the left channel. After connecting the speakers to your home Wi-Fi network, you can inverse the L/R channels in the KEF Connect App. 7. Do I need to pair the two speakers? • No, the two speakers are already paired at the factory. If you do not hear any sound from the Secondary Speaker, see chapter “Troubleshooting”. Table of Contents 6.
1. Which is the best wireless streaming option for different apps? • Recommendations for the best wireless streaming options with regard to music/ media apps on your mobile devices.
• You can stream through AirPlay, Chromecast or Bluetooth. Subject to changes according to the platforms. 3. Is the subwoofer output mono or stereo? • The output is mono. Table of Contents 2. Can I stream audio output from Youtube, Netflix and other media contents to the speakers? • In the KEF Connect App: 1) In Settings, go to “Volume”, change “Volume Display” to “-/+” 2) Select the relevant source input. Setting Up 4.
Troubleshooting 1. What should I do to set up the speakers to another network? • A factory reset is necessary. This will clear the previous network settings and all EQ and system preferences. For this purpose, press and hold the Reset button (R) on the back panel until the LED light above the button blinks. 2. What should I do if I cannot find my speakers in the network during set-up? Table of Contents 19.3 • Make sure the LED light of the Primary Speaker is blinking white and amber.
• Make sure the Secondary Speaker is connected to power. • Check if the connection between the two speakers is lost (the LED indicator light of the Primary Speaker is blinking white and blue). If the connection is lost, short press the P/S pairing button (P) on the back panel of the Primary Speaker to re-establish the connection. Wait a while until the connection is established. Note: Do not press the button for more than 1 second. Table of Contents 6. There is no sound from the Secondary Speaker. 7.
• As a last resort, power cycle the TV (unplug the power cable from the TV and wait about 10-15 seconds before plugging it back in) and try again. Smart TVs are like phones and sometimes require a reboot. • If the problem persists, please report the issue in the Support section of the KEF Connect App for investigation. In the meantime, use the Optical connection as a fall-back solution.
The connection and operation status can be easily checked through the colours and patterns of the LED indicator lights on the Primary and Secondary Speakers. Refer to the table below. Speaker Pattern Status Primary Blinking white and amber The speakers are ready to connect to a Wi-Fi network. Launch the KEF Connect app to set up the speakers. Primary Pulsing amber The speakers are in Standby Mode and trying to connect to a Wi-Fi network.
The speakers are connecting to a TV. Primary Blinking light blue The speakers are not connected to a TV. Primary Solid magenta* The speakers are operating in Optical Mode. Primary Solid lavender* The speakers are operating in Coaxial Mode. Primary Solid yellow* The speakers are operating in AUX Mode. Primary Blinking white slowly The speakers are muted in Wi-Fi Mode. Primary Blinking blue slowly The speakers are muted in Bluetooth mode.
Cable Mode is enabled and the connection between the speakers is interrupted. Blinking light blue and yellow Secondary No LED light 1. Make sure the inter-speaker cable is connected between the Primary Speaker and Secondary Speaker. 2. Make sure the inter-speaker cable is inserted in the correct connection ports: “(T) To P/S” on the Primary Speaker and Secondary Speaker. The Secondary Speaker is operating normally. The Secondary Speaker is in the wireless pairing mode searching for the Primary Speaker.
Primary and Secondary Blinking white, blue, light blue, magenta, lavender and yellow alternately Status The firmware is being updated. Do not unplug the power cables until the firmware update is completed. If you encounter any issues during the firmware update, do not interrupt the process and contact your local representative or contact your local KEF dealer. Table of Contents Speaker Pattern The firmware update process failed. 2. Wait approximately 60 seconds.
20.1 Specifications Model LS60 Wireless Drive units Uni-Q Driver Array: HF: 19 mm (0.75 in.) vented aluminium dome with Metamaterial Absorption Technology# MF: 100 mm (4in.) aluminium cone Uni-Core Force Cancelling Driver: LF: 4 x 135 mm (5.25 in.) Frequency range (-6 dB) measured at 85 dB/1 m 26 Hz – 36 kHz *Depends on EQ settings Table of Contents Appendix Setting Up 20.
1,090 x 212 x 394 mm 1,042 x 130 x 321 mm (42.9 x 8.3 x 15.5 in.) with (41.0 x 5.1 x 12.6 in.) plinth without plinth 1,090 mm 212 mm 394 mm Weight (per set) 62.4 kg (138 lbs) Power input 100–240 VAC 50/60 Hz Power consumption 450 W (operating power) < 2.
Metamaterial Absorption Technology is a joint development with Acoustic Metamaterials Group Wireless performance depends on many factors, including network traffic, distance from access point, room materials and construction, interference and other adverse conditions. For further information and troubleshooting, please visit the KEF website: KEF.COM KEF reserves the right, in line with continuous research and development, to amend or change specifications without prior notice. E. & O.
What this means is that your total network bandwidth must exceed the total bandwidth requirements of all devices on the network. If your active network devices need more bandwidth than what is available, then you may experience slower speeds, reduced performance and dropouts. This is not as much of a problem for web browsing or file downloads (except for being slower) but is especially problematic for music streaming. My test score is a lot lower than what I pay my ISP for.
KEF speaker system (Factors in the quality of the system’s connection to the network) Improving your network experience There are a few ways in which bandwidth may be improved. Some are very simple and require no knowledge of computers and routers, whilst others are slightly more advanced, involving changing router settings. Always refer to the router manual, and if in doubt, do consult a professional.
Basic Steps to take if using a wireless connection. These steps do not involve changing the settings of your router: 1. Ensure the router firmware is updated. Table of Contents If connected wirelessly: This is a basic step for any electronic device, as updated firmware may address known bugs. Routers are basically computers and are affected by the same problems.
If you have a lot of devices on the 2.4 GHz band, then there may be little available bandwidth left. If your KEF speaker system is close to the router and has little to no obstructions, try connecting it to the 5 GHz band for more bandwidth. If there are obstructions, try migrating network devices that are closer to the router to the 5 GHz band instead, freeing up bandwidth on the 2.4 GHz band. This is also useful if you have a lot of neighbours close by, as their networks may be interfering with yours.
So, when designing a mesh network or planning where to place Wi-Fi extenders, budget for more nodes than you think you need, and place them closer together. This will help maximise the potential bandwidth. FAQ and Troubleshooting Using KEF Connect App It is also worth noting that different router manufacturers handle mesh technology differently, and there may be compatibility issues with networked devices.
Explanation of symbols 20.3.1 Warning Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the products enclosure that may be of a sufficient magnitude to constitute a risk of electrical shock to persons. Table of Contents 20.3 Europe and North America This marking indicates that this product should not be disposed with other household wastes throughout the EU.
The symbol indicates that the product meets the specified safety requirements of Singapore Consumer Protection Registration Scheme. The Japan PSE Mark Certification indicates that the product meets the technical requirements of the Electrical Appliance and Material Safety Law (DENAN). These marks indicate compliance with technical and design requirements for telecommunication terminal equipment in Japan.
NEC Factory Code: 0x01 Functions Function codes 1 Power on/off toggle 0x40 2 Mute/un-mute toggle 0x20 3 Play/Pause 0x18 4 Forward 0x52 5 Next source 0x58 6 Volume up 0x60 7 Volume down 0xA0 8 Backward 0xD2 9 Power ON 0x38 10 Power OFF 0x3A 11 Mute 0x48 12 Un-mute 0x4A 13 Source: Wi-Fi 0x30 14 Source: Bluetooth 0x2A 15 Bluetooth pairing 0x98 16 Source: AUX 0x02 17 Source: Optical 0x0A 18 Preset volume (30 %) 0x78 19 Source: HDMI 0x88 / 0x8A 20 So
For more support, please visit kef.