Owner's Manual
Table Of Contents
- User Manual
- Table of Contents
- Introduction
- General Information
- In the Box and Unpacking
- Setting Up LSX II
- Connection and Control Interface
- Wi-Fi Streaming
- Multi-Room Streaming
- Voice Control Over Mobile Device
- Playback with Bluetooth
- Playback with HDMI ARC input
- Playback with Optical Input
- Playback with USB Input
- Playback with Auxiliary Input
- Using KEF Connect App
- Cleaning and Maintenance
- Disposal
- FAQ and Troubleshooting
- Appendix
- Quick Start Guide
- Maintenance Guide for Kvadrat Fabrics
- Important Safety Information & Specifications
- Warranty
18
Table of ContentsSetting UpWi-Fi StreamingUsing KEF Connect AppFAQ and Troubleshooting
5. Connection and Control Interface
5.1 Front Panel
Primary SpeakerSecondary Speaker
• An LED indicator light can be found on each speaker, below the Uni-Q driver
(speaker cone).
• The IR (infrared) receiver for the remote control can be found on the Primary
Speaker where the LED indicator light is located.
The LED indicator light of the Secondary Speaker only comes on when:
• The Secondary Speaker is initially connected to power and is working
properly. The LED indicator light will briefly come on orange and then go out.
• An error occurs.
• During normal operation the LED indicator light on the Secondary Speaker
will not illuminate.