Owner's Manual
Table Of Contents
- User Manual
- Table of Contents
- Introduction
- General Information
- In the Box and Unpacking
- Setting Up LSX II
- Connection and Control Interface
- Wi-Fi Streaming
- Multi-Room Streaming
- Voice Control Over Mobile Device
- Playback with Bluetooth
- Playback with HDMI ARC input
- Playback with Optical Input
- Playback with USB Input
- Playback with Auxiliary Input
- Using KEF Connect App
- Cleaning and Maintenance
- Disposal
- FAQ and Troubleshooting
- Appendix
- Quick Start Guide
- Maintenance Guide for Kvadrat Fabrics
- Important Safety Information & Specifications
- Warranty
19
Table of ContentsSetting UpWi-Fi StreamingUsing KEF Connect AppFAQ and Troubleshooting
5.2 Back Panel
Controls and connections are found on the back panel of each speaker, marked as shown.
R
Factory reset button Resets the speakers to the factory defaults (including
network settings and all EQ and system preferences).
Press and hold the button until the indicator light
above the button blinks.
P
P/S pairing button Re-establishes the connection between the Primary
Speaker and the Secondary Speaker if the connection
is lost.
B
Bluetooth pairing button Enables Bluetooth pairing. The speakers will be ready
to pair with a new device. Any Bluetooth connected
device will be disconnected.
O
Optical input jack Plays audio input from a source (e.g. Blu-ray player,
cable box) through an optical cable.
U
USB port (type C) Plays audio input from a computer or charges an
external device* (e.g. KW-1 Wireless Kit).
*Requires activation of the USB charging function in
the KEF Connect App. The USB audio input function
will be disabled.